as title says guys .....can someone please tell me how i can go back to the previous firmware at moment i use an ipad air 2 cellular if that's any help
Thanks

What's the nightmare, what's not working for you ?

Firmware on aircraft, firmware on RC, or both ?

What problems are you having ?

Installed the latest 1.8 i think ??? To my ipad air 2 came to fly and the video transmission on the on the iPad screen  ranged from total green half picture blanc screen green again then a bit of picture ..........the only time i get a full but blurry picture is when the cameras pointed down.....................could someone PLEEEEAAAAASE tell me how to do it

fans71b054df Posted at 2016-11-5 04:10
Installed the latest 1.8 i think ??? To my ipad air 2 came to fly and the video transmission on the ...

Can you please verify what Phantom model you have? Are you referring to AC firmware or RC firmware?

fans71b054df Posted at 2016-11-4 20:10
Installed the latest 1.8 i think ??? To my ipad air 2 came to fly and the video transmission on the ...

Do you get this interference on the recorded image on the SD card ?

With all connected and powered up go into 'General Settings' menu and scroll down to the bottom and click on 'about', that should show The software and firmware builds in use on the Display device, aircraft & RC.

Let us know what you find.

hello everybody i have same problem on my P4 with last firmware too .. i work yeesterday and ipad mini air 2 have all day with 3 differents place for fly the same problem !! all day gree screen and you lost return video !! its impossible to work and i hope DJI ddo something soon !! andi have same problem oon inspire 1 X3 with last firmware !!!

Just installed the previous version test flying it later so i will get back to tell you guys how i went on

fans4861cfa3 Posted at 2016-11-5 17:07
hello everybody i have same problem on my P4 with last firmware too .. i work yeesterday and ipad mi ...

Both remote and aircraft are up to date, and you installed the latest DJI GO APP, right?
it was fine before you upgrade the aircraft to the latest in the same place?
Have you checked the HD page on APP about the channel? On your iPad, you have enabled "Hardware decoding" and turn off all background programs, right?
Have you tried to reset it to factory default through the Assistant2?