Need help my inspire not uodating to latest firmware v1.9.30 insert sd card to gimball and nothing happen the led light flashing yellow and no sound

Is the SD card completely clear with only the .bin file on it? Have you tried reformatting the card and trying again?

Yes sd completely clear and reformatted over 5 times and download the .bin notting happen

     Make sure you have the correct firmware, triple check it.  The Inspire 1 will only work with that Firmware , if you have the Pro or Raw you must use that one. Are you using a Mac or PC ?  Macs sometimes dont wipe the whole  file when formatting , use the Aircraft to format  the SD card  and try again.  Use a PC whenever possible for updating.
More than likely the fixes above will take care of the problem .

donnie

Donnie Posted at 2016-11-6 02:58
Make sure you have the correct firmware, triple check it.  The Inspire 1 will only work with th ...

Thank u Donnie bought a new sd card and download the firmware to my pc and finally work and able to update the inspire.

Vernie Posted at 2016-11-6 23:10
Thank u Donnie bought a new sd card and download the firmware to my pc and finally work and able t ...

Cool, glad you are up and running.

donnie

Vernie Posted at 2016-11-7 13:10
Thank u Donnie bought a new sd card and download the firmware to my pc and finally work and able t ...

Good to hear, thank you for the update!