I resently crashed my phantom 3pro and broke the yaw on my gimbal althow i have repaired it it still seems to leen to the right everytime i swith it on
It worked time until i updated my remote controler and now i keep  losing image and it blurry most of the time any ideas how to fix it?

Had you already performed an IMU calibration and gimbal calibration to correct the pan? For the video feed, you can try the following. First, reset the RC with this button combination:

* Turn on the controller, and the aircraft should be off.
* Press C1, C2, and shutter on the controller then turn the controller off.
* Turn on both the aircraft and the controller and link the remote.

I would recommend manually relinking with the following combination:

* Turn on both the aircraft and the controller.
* Press C1, C2, and the record button on the controller, then the controller will beep like D-DD.
*Let go all fingers, press the wheel on the right side of the controller and then the first light of the controller will become blue and it will constantly beep DDDD.
* Use a pen to click the linking button on the aircraft and hold for 3-5 seconds, and then take the pen off the aircraft and wait, it will be linked soon.

I also broke my yaw arm, and after a couple of attempts to repair it myself, sent it to DJI in California. Total cost was $114 and it took lees than 2 weeks.

Khsalum83@hotma Posted at 2016-12-11 03:29
I also broke my yaw arm, and after a couple of attempts to repair it myself, sent it to DJI in California. Total cost was $114 and it took lees than 2 weeks.

Good to hear you were able to get it addressed.