3x3q
lvl.2
Flight distance : 815666 ft
United States
Offline
|
I am having exactly the same issue as OP.
I have cameras setup on AV and HDMI inputs on LB2 Air Unit. The two cameras can both output to Android or iOS device through USB, and I can switch between both video feeds there, but no video feeds of any kind will output on either the master or slave LB2 Ground Unit HDMI outputs. The only thing that shows up on the HDMI output is the OSD, which comes from the LB2 Ground Unit, not the AV/HDMI camera inputs.
I should also mention: because none of the HDMI outputs on either master or slave LB2 Ground Units will work, all picture-in-picture (PIP) capability is gone, since PIP is obviously not working on USB devices. Seriously, DJI.
THE ONLY WAY to get HDMI output on LB2 Ground Units to work is to enable the EXT Port. Doing this forces just 1 of the 2 video inputs to be accepted over LB, and since I don't have any video input on EXT, it's just blank. Bugs galore.
Setup:
M600
Ronin-MX
SRW-60G
HDMI input: RED Epic W or Canon 5D III
AV input: GoPro Hero 4 Black on a 2-axis gimbal |
|