Please select Into the mobile phone version | Continue to access the computer ver.
Vision 2 camera defect with ribbon and assembly
1134 4 2014-10-3
Uploading and Loding Picture ...(0/1)
o(^-^)o
chrisc
lvl.1
Flight distance : 44334 ft
United States
Offline

I have purchased my second DJI 2 camera after the ribbon broke on the first one and the oring gave out the first week I owned the DJI.  I've owned the second camera for 2 weeks now and the oring on the second camera won't hold the camera assembly in place again.  2 thoughts:  First, I think I have to firgure out a way to tie the camera assembly together so I don't lose the camera in flight and 2) This seems like a clear defective design that DJI is no doubt aware of and I wonder if enough users experience this and talk about can we get DJI to make good by replacing these defective assembly's.
Chris


2014-10-3
Use props
hd_ultra
lvl.4

United States
Offline

Can you post a photograph.
2014-10-3
Use props
matthew.r.hornb
lvl.1

Germany
Offline

By O ring, do you mean the anti-vibration mount? There should be some anti-drop pins with it, or if not just loop a cable tie loosely through the middle.
2014-10-6
Use props
support
New

United States
Offline

helihobby.com -

Hi there,

We can replace the ribbon for you (as long as the gimbal, motors and camera are not damaged).
We charge a flat fee of $160 to replace the ribbon cable for the Phantom 2 Vision + camera/gimbal unit . This price includes labor and parts.

For more info please visit:
http://www.helihobby.com/multiro ... repair-service.html

Repair center location: California, Los Angeles County.
2015-1-12
Use props
droneflyers.com
First Officer
Flight distance : 60709 ft
  • >>>
United States
Offline

They should definitely improve the design (hardiness) of this......until then, there is this:
http://www.killerrc.com/product/ ... i-phantom-2-vision/
2015-1-12
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules