Please select Into the mobile phone version | Continue to access the computer ver.
Where To Download X5R Firmware?
2829 15 2016-11-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
RotorHeadPilot
lvl.1
Flight distance : 164888 ft
United States
Offline

I know that surely this is rudimentary, but I can't find the .bin file for my X5R firmware anywhere.  DJI go says to follow the tutorial in Acadamy, but there are no tutorials there for just the camera firmware, only the copter itself.  All tutorials I've seen point me to a page which doesn't seem to exist... the DJI site only lists copter firmware, not camera firmware, even on the downloads page for the X5R specifically.  
Where do I find this file?  Please post a link.

Thanks,
Dave
2016-11-28
Use props
fans694dfe25
First Officer
Flight distance : 4505095 ft
  • >>>
United Kingdom
Offline

http://www.dji.com/zenmuse-x5r/info#downloads
2016-11-28
Use props
RotorHeadPilot
lvl.1
Flight distance : 164888 ft
United States
Offline

Thank you, but this is the same page I've been seeing.  The tutorials show a link on this page for "X5R Firmware" but there isn't one.  Only this:
Inspire 1 RAW Firmware v01.09.01.30
2016-07-07
Inspire 1 RAW Firmware v01.08.01.40
2016-04-27
Plus sample files, Documents, manuals, and software.

The inspire firmware isn't the same as camera firmware, so I'm looking for a direct download link for camera firmware.

Thank you,
Dave
2016-11-28
Use props
Mike-the-cat
Captain
Flight distance : 14411854 ft
  • >>>
Singapore
Offline

RotorHeadPilot Posted at 2016-11-29 07:54
Thank you, but this is the same page I've been seeing.  The tutorials show a link on this page for " ...

Updating the camera will update the aircraft if there are updates for the aircraft when you go to the Inspire collection of upgrades and not the Osmo ones.
2016-11-28
Use props
RotorHeadPilot
lvl.1
Flight distance : 164888 ft
Offline

Mike-the-cat Posted at 2016-11-29 08:35
Updating the camera will update the aircraft if there are updates for the aircraft when you go to  ...

The problem is, I can't update the camera, because I can only download the firmware for the aircraft.

My aircraft firmware is up to date.  9.01.30.  When I attempt to start the update process anyway using that firmware, the aircraft ignores it entirely. I've reformatted the card, re-downloaded the firmware, used the same process as with past aircraft updates. No update process occurs, and every other time I restart the aircraft I still get a warning up upgrade the camera.

None of this is making sense.  My camera firmware is 9.10.10.  Can anyone verify what the latest X5R is?

Thanks.
2016-11-28
Use props
RotorHeadPilot
lvl.1
Flight distance : 164888 ft
United States
Offline

RotorHeadPilot Posted at 2016-11-28 19:38
The problem is, I can't update the camera, because I can only download the firmware for the aircra ...

Correction - typo, the camera firmware is 1.9.1.10
2016-11-28
Use props
Mike-the-cat
Captain
Flight distance : 14411854 ft
  • >>>
Singapore
Offline

RotorHeadPilot Posted at 2016-11-29 12:35
Correction - typo, the camera firmware is 1.9.1.10

Don't sweat it, just ignore the warning, you aren't missing anything. One thing to do not to get the error message is to start RC, aircraft and then remote control. 1.9.1.10 is really fine in the worst case.
2016-11-28
Use props
RotorHeadPilot
lvl.1
Flight distance : 164888 ft
Offline

Mike-the-cat Posted at 2016-11-29 13:54
Don't sweat it, just ignore the warning, you aren't missing anything. One thing to do not to get t ...

Well I agree it hasn't caused me any problems the last few days. Is anyone out there using newer firmware in their X5R than 1.9.1.10?  If so, I'd love to know how they got it. And if not, is everyone getting this message, or should I consider it an anomaly?  I guess I'll take it up with support, but yes, no issues otherwise.

Thanks!
2016-11-29
Use props
Mike-the-cat
Captain
Flight distance : 14411854 ft
  • >>>
Singapore
Offline

RotorHeadPilot Posted at 2016-11-30 01:33
Well I agree it hasn't caused me any problems the last few days. Is anyone out there using newer f ...

The difference between 1.9.1.10 and 1.9.1.30 is that with the former, you'll occasionally get a warning that VPS has failed. This is corrected with the later firmware but unless you are doing ground hugging flights, this shouldn't concern you.

It is very weird that the camera won't update. If you have nothing better to do, you can load up the older 'official version' of the FW on an SD card and install it. This will downgrade you. If you can't downgrade, something is odd is afoot.

The X5R is a mature product now and its unlikely there will be any new upgrades. Some of us had problems with 'No Transmission' messages earlier but it was discovered (at least by myself) that they were due to faulty connections between the camera and the aircraft and not firmware problems.
2016-11-29
Use props
RotorHeadPilot
lvl.1
Flight distance : 164888 ft
United States
Offline

Mike-the-cat Posted at 2016-11-29 15:39
The difference between 1.9.1.10 and 1.9.1.30 is that with the former, you'll occasionally get a war ...

Actually already tried the downgrade, which worked, then re-upgraded. Camera firmware was restored again to 1.9.1.10.  I'm not going to worry about it.  Thanks for the help.
2016-11-29
Use props
Donnie
Captain
Flight distance : 3636782 ft
United States
Offline

RotorHeadPilot Posted at 2016-11-29 18:43
Actually already tried the downgrade, which worked, then re-upgraded. Camera firmware was restored ...

Is this the page you are looking for ?

In the future go to DJI.com,    then Imaging solutions tab, then X5R, then find the "Downloads Page" Like in pic below , this will take you to you there .  Kinda hidden .
Looks like you have the problem solved , just letting you know how to find the page you seek .

donnie
x5r.PNG
2016-11-30
Use props
RotorHeadPilot
lvl.1
Flight distance : 164888 ft
United States
Offline

Donnie Posted at 2016-11-30 06:07
Is this the page you are looking for ?

In the future go to DJI.com,    then Imaging solutions tab, ...

Yes, this is where I've been going, but there's no firmware for download that's specifically for the camera, as opposed to the aircraft. One of the tutorials I found showed a screen shot of that page, WITH a download link for camera firmware, but I've never seen that.
2016-11-30
Use props
Donnie
Captain
Flight distance : 3636782 ft
United States
Offline

RotorHeadPilot Posted at 2016-11-30 18:04
Yes, this is where I've been going, but there's no firmware for download that's specifically for t ...

This is it right here:http://www.dji.com/zenmuse-x5r/info#downloads

x5r.PNG
2016-12-1
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

RotorHeadPilot Posted at 2016-12-1 08:04
Yes, this is where I've been going, but there's no firmware for download that's specifically for t ...

DJI has changed how they named downloads and how some components are updated over time. Please be advised that the camera's firmware package is combines with the aircraft's firmware package. Not all firmware versions have updates for the camera, the same thing can happen with the aircraft. Looking at the release notes will tell you what component that the update will effect and how the firmware versions will read in the about section of your app.

For example, the latest aircraft version is v01.09.01.30 and the camera version is v01.09.01.10. If your running older firmware on bothe components, the v01.09.01.30 firmware file will also upgrade the camera to v01.09.01.10. If your running the current aircraft firmware and the camera has older firmware than what's above, then only the camera will be updated when you run the v01.09.01.30 .BIN file on the camera. The opposite is true should the aircraft firmware have older firmware than the camera.

All the Inspire 1 models (I1 V2 with the X3, I1 Pro with the X5, and the I1 Raw with the X5R) firmware files have the exact same aircraft versions, but contain different camera firmware packages). Should you have both and X3 and an X5R, you can use either camera to update the aircraft, but will need to change cameras and firmware downloads should you need to update the other camera.

I hope this helps clarify.
2016-12-1
Use props
RotorHeadPilot
lvl.1
Flight distance : 164888 ft
United States
Offline

DJI-Jamie Posted at 2016-12-1 14:05
DJI has changed how they named downloads and how some components are updated over time. Please be a ...

Thank you, yes this is helpful... it just doesn't explain why I'm still getting notices to upgrade, but I'll get used to it :-)
2016-12-2
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

RotorHeadPilot Posted at 2016-12-3 10:48
Thank you, yes this is helpful... it just doesn't explain why I'm still getting notices to upgrade ...

Which component is it asking you to update? Could you please provide a screenshot of Overall Status section and of the About section?
2016-12-2
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules