Please select Into the mobile phone version | Continue to access the computer ver.
New firmware for Phantom 3 Pro/Adv has been released.
12345678910Next >
43565 360 2016-11-28
Uploading and Loding Picture ...(0/1)
o(^-^)o
DJI Mindy
Administrator
Flight distance : 7 ft
Offline

Overview:

1. All-in-One firmware version updated to v1.10.90.
2. DJI GO app iOS version updated to v3.1.0.      
3. DJI GO app Android version updated to v3.1.0.

What’s New?

1. Optimized Flight Restriction Zone management by deleting flight restrictions for some abandoned airports.
2. Optimized HDR+RAW format photos.
3. Improved motor performance to prevent occasional overheating resulting from a motor stall.
4. Slowed motor stopping time to three seconds during flight.


Notes :
Cannot roll back the firmware version after upgrading to v1.10.90.









2016-11-28
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

You sure this is the safe to update?
If cannot downgrade back to previous firmware what happen if this latest firmware not stable to fly?
2016-11-28
Use props
DINGO DOWN UNDA
Second Officer
Flight distance : 3058816 ft
Australia
Offline

Nelsonlee Posted at 2016-11-29 17:29
You sure this is the safe to update?
If cannot downgrade back to previous firmware what happen if th ...

Dont do it NelsonLee...not yet.....leave it for awhile !!!
2016-11-29
Use props
OleDrone
lvl.3

Switzerland
Offline

never stop a running horse....

or ... never come back airline

Thanks DJI
O.
2016-11-29
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

DINGO DOWN UNDA Posted at 2016-11-29 16:51
Dont do it NelsonLee...not yet.....leave it for awhile !!!

Ya bro i will not do it at this moment until confirm is stable to upgrade.
2016-11-29
Use props
KuChar
lvl.2
Flight distance : 723156 ft
Poland
Offline

Anyone upgraded firmware?
2016-11-29
Use props
fans828d9fb1
lvl.1

Netherlands
Offline

doing it now.
2016-11-29
Use props
KuChar
lvl.2
Flight distance : 723156 ft
Poland
Offline

Feedback, please.
2016-11-29
Use props
bramboNL
lvl.1

Netherlands
Offline

chill chill i just started
2016-11-29
Use props
bramboNL
lvl.1

Netherlands
Offline

the remote bleebs and give red light.   drone updated succesfull
2016-11-29
Use props
fans82ed31d9
lvl.2
Flight distance : 2894623 ft
Spain
Offline

Good morning, DJI Mindy. Could you tell me why you could not go back to 1.9 in case of problems? Thank you.
2016-11-29
Use props
bramboNL
lvl.1

Netherlands
Offline

Update finished and no problems.
2016-11-29
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

bramboNL Posted at 2016-11-29 20:12
Update finished and no problems.

We know no problem for the upgrade step, we need to know got any issue for the fly or not!
2016-11-29
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

download.png
2016-11-29
Use props
KuChar
lvl.2
Flight distance : 723156 ft
Poland
Offline

How about flight and video transition? Any glitches?
2016-11-29
Use props
bramboNL
lvl.1

Netherlands
Offline

No problems for flight or map and video.  Im in a restricted zone,  the zone is smaller now.  That's a small difference.
2016-11-29
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

bramboNL Posted at 2016-11-29 20:47
No problems for flight or map and video.  Im in a restricted zone,  the zone is smaller now.  That's ...

Try do more fly and share us the video....
2016-11-29
Use props
bramboNL
lvl.1

Netherlands
Offline

I have work also.  But no problems during 16min flight.  
2016-11-29
Use props
DaveB87
lvl.1

Ireland
Offline

tried installing the update on my P3P - it makes the beep beep beep beep when installing, then I get a continuous non stop beep - the only way to stop it is to turn the drone off...... restarted the install, and it did it again, only this time it got to the continuous beep in about 30 seconds......
2016-11-29
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

DaveB87 Posted at 2016-11-29 22:53
tried installing the update on my P3P - it makes the beep beep beep beep when installing, then I get ...

.....Failed update!
2016-11-29
Use props
bramboNL
lvl.1

Netherlands
Offline

format sd card en add the file with full battery.  good luck!
2016-11-29
Use props
scottyduzitbest
lvl.1

United States
Offline

downgrade to anyversion you want, easy we do it all the time. open the shell remove the main board, cut glue on internal sd card glued to bottom of main board, throw it away or format it your choice.  we install 8 gig for more flight log storage capacity. Either way with your new or formatted card in and reglued with silicon NOT HOT GLUE, reassemble drone. stick your firmware bin file on a seperate sd card and insert into gimbal. firmware must not be   downloaded from dji, all theirs will ad a + to the version label indicating its modified for altitude limit, no fly zones ect.... search around or contact me and I can possibly help you with an unmodified, non dji molested firmware version of your choice. I have em all.... be sure to do your transmitter and batteries too. well batteries wont matter on downgrade. if you downgrade far enough besure to remove djigo and find a dji pilot app download... questions about the procedure then this aint for you inwhich case contact me lol happy unrestricted flying!!!
2016-11-29
Use props
RJay
lvl.1

Singapore
Offline

i have a successfull upgrade but havent fly it yet. I have checked the aircraft version in dji app ... ver 1.9.60+.. not 1.10.90....anyone got the same version or diffrent
2016-11-29
Use props
DaveB87
lvl.1

Ireland
Offline

Formatted the SD card, and put the updated .bin file onto it, and got a successful update, everything is working as it should - haven't had chance to do a test flight yet....

For these battery updates, i presume I have to put in all 3 batteries that I have with the update SD card inserted in the gimbal to update them?

On a brighter note, my Samsung S7 Edge is now talking to everything, which has been a major issie for many users recently!!
2016-11-29
Use props
RJay
lvl.1

Singapore
Offline

DaveB87 Posted at 2016-11-29 18:05
Formatted the SD card, and put the updated .bin file onto it, and got a successful update, everythin ...

HidaveB87...have you check your aircraft firmware version in dji go app...what did you get...
2016-11-29
Use props
RMDrone
lvl.2
Flight distance : 239308 ft
Spain
Offline

Updated finished and get ver 1.9.60+ in the DJI Go app
2016-11-29
Use props
DaveB87
lvl.1

Ireland
Offline

RJay Posted at 2016-11-29 17:08
HidaveB87...have you check your aircraft firmware version in dji go app...what did you get...

RJay: here's my firmware versions according to the DJI app.....
Screenshot_20161129-193733.png
2016-11-29
Use props
UCLABruins
lvl.3
Flight distance : 488904 ft

United States
Offline

No thank you. There's no new features so there's no point. I'll pass
2016-11-29
Use props
Kolbasatka
lvl.1
Flight distance : 293734 ft
Russia
Offline

UCLABruins Posted at 2016-11-30 05:26
No thank you. There's no new features so there's no point. I'll pass

I agree. And very strange notes: "Cannot roll back the firmware version after upgrading to v1.10.90." {:4_154:}
2016-11-29
Use props
Stargreg
lvl.1
Flight distance : 17067 ft
United Kingdom
Offline

RJay Posted at 2016-11-29 17:01
i have a successfull upgrade but havent fly it yet. I have checked the aircraft version in dji app . ...

Same situation I have as yourself regarding the firmware for the aircraft, I guess this must me normal then.
I have had a test flight and everything seems fine regarding the new aircraft firmware, however after the upgrade myself the aircraft feels smoother to handle in GPS mode let me know if this is the same for you.
2016-11-29
Use props
Vishnu1958
lvl.2
Flight distance : 23 ft
India
Offline

scottyduzitbest Posted at 2016-11-29 22:25
downgrade to anyversion you want, easy we do it all the time. open the shell remove the main board,  ...

Hi Scotty!,

I liked your approach. Is there any tutorial link for doing the downgrade through replacing the glued SD card? I will love to try it. Right now I am very happy with my P3A on 1.53+ and RC on 1.6.

Vishnu
2016-11-29
Use props
Alberto Pasian
lvl.3

Italy
Offline

Stargreg Posted at 2016-11-30 00:58
Same situation I have as yourself regarding the firmware for the aircraft, I guess this must me no ...

That's really interesting. If possible I'd like to hear more opinion on flying smoothness as I plan to upgrade next week-end. Thanks!
2016-11-30
Use props
Ahmet67
lvl.2
Flight distance : 984852 ft
Turkey
Offline

RJay Posted at 2016-11-29 19:01
i have a successfull upgrade but havent fly it yet. I have checked the aircraft version in dji app . ...

same here !!
2016-11-30
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

Need to wait more fly result before i proceed to upgrade mine P3A......
2016-11-30
Use props
bramboNL
lvl.1

Netherlands
Offline

Strange..  Feels smoother.   No problem after update.  Perfect connections and flight time.  
2016-11-30
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

bramboNL Posted at 2016-11-30 22:39
Strange..  Feels smoother.   No problem after update.  Perfect connections and flight time.  {:4_152 ...

Capture video upload.....
2016-11-30
Use props
ARM-001
lvl.4
Flight distance : 666893 ft
United Kingdom
Offline

Be wary of rushing to update where no added features are being rolled out, or where there are no fixes on the grounds of safety or bugs.  Even more so when you're told that you can't roll it back. DJI are notorious for sneaking in 'features' that piss off their customers who then have no option but to continue using it in the new form. They've done it before, they'll do it again. DJI take the attitude that these are their drones, you should count yourself lucky to be able to fly them. The update isn't for your benefit, it's for theirs.

If your current F/W version works fine, no reason to rush into updating it. You're not gaining anything.  Leave it a few weeks and then, assuming no major problems reported, go ahead if you want to. You're not missing out on anything in the interim, except the risk that your beloved drone isn't quite as good as it once was.
2016-11-30
Use props
Nelsonlee
Captain
Flight distance : 1958609 ft
  • >>>
Malaysia
Offline

ARM-001 Posted at 2016-11-30 23:10
Be wary of rushing to update where no added features are being rolled out, or where there are no fix ...

....noted
2016-11-30
Use props
fansa026d1a4
lvl.1

United Kingdom
Offline

KuChar Posted at 2016-11-29 11:05
Anyone upgraded firmware?

Yes; Intelligent Flight Modes not working, image transmission unusable. Was working fine before.
Return to Home not working

Manual flight stable , manual control of gimbal OK but a real pain to have lost Waypoints

Phantom 3 Prof, Nexus tablet with Android 7

Was not aware that I could not roll back

Tony
2016-11-30
Use props
Rnfaust
Second Officer
Flight distance : 559642 ft
United States
Offline

Nelsonlee Posted at 2016-11-30 03:48
Need to wait more fly result before i proceed to upgrade mine P3A......

Did it yesterday on my P3A. Everything is now up to date on controller and IPad mini. Did an IMU calibration after and verified settings. All was well.
FYI: It was a long update with several reboots. Remember it's successfully finished when the little LED light on the front of the gimbal stays solid green.
Took it out at the blue hour last night running the Go app and then changed midair to Litchi and ran this WP mission. Then switched back to Go app and landed. Everything was perfect. Except the occasional tilted horizon, which it looks like they will never correct.

2016-11-30
Use props
12345678910Next >
Advanced
You need to log in before you can reply Login | Register now

Credit Rules