Hi all, here is a picture of my IMU calibration results

DJI reccomended that do another IMU calibration due to the fact my horizonatal tilt issues.

Now in the past, i dont recall the green bars on the left being so long compared to the gyroscope bars being so short.

Opinions please.

ALSO does it matter if the IMU calibration is done inside ?

I performed this one inside on a perfectly flat and level surface i created

Thanks all

Mine arent that high, but its still in the green i suppose ... The tutorial for calibrating the IMU is done inside and i dont see how taking it outside would benefit it anyway ... If you leave that screen up for a good minute or so, do the bars reduce considerably?

The bars are bigger now but the values are stupid low 0.002

Danny-B- Posted at 2016-12-6 20:30
Mine arent that high, but its still in the green i suppose ... The tutorial for calibrating the IMU is done inside and i dont see how taking it outside would benefit it anyway ... If you leave that screen up for a good minute or so, do the bars reduce considerably?

Online DJI tech support demanded i do the IMU outside which makes no sense to me at all, now the compass calibration does need to be done outside, thats a no brainer but the IMU WTF ?

Do you still have the horizontal tilt issue?
Please do a cold IMU calibration on a completely flat surface and then do the gimbal calibration.
DJI GO app now prompt you to do the compass calibration?