Please select Into the mobile phone version | Continue to access the computer ver.
N3 mounting on S900
1482 7 2016-12-10
Uploading and Loding Picture ...(0/1)
o(^-^)o
fans85e0d913
lvl.2

United Kingdom
Offline

Hi folks,

Where are people thinking in terms of where to mount the N3 flight controller on the Spreading Wings S900? On the vertical plate like the A2? I see those who've mounted the A3 are putting it on the top plate horizontally?
2016-12-10
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

You can mount it similarly to the A2 or A3 on the same frame.
2016-12-10
Use props
Tom
lvl.2

United Kingdom
Offline

DJI-Jamie Posted at 2016-12-10 23:22
You can mount it similarly to the A2 or A3 on the same frame.

Hi Jamie, Thanks - so on the vertical plate on the front of the frame? LB 2 then will go on the plate on the other side.

I'm confused as to why A3 users were mounting it on the top of the craft....!
2016-12-10
Use props
Tom
lvl.2

United Kingdom
Offline

Tom@Rotorworld Posted at 2016-12-10 23:28
Hi Jamie, Thanks - so on the vertical plate on the front of the frame? LB 2 then will go on the plate on the other side.

I'm confused as to why A3 users were mounting it on the top of the craft....!

I read the FULL manual for the N3 (what comes with it is only a quick start - RTFM!).

The N3 has to be mounted horizontally, so that would mean the top plate on the S900, and the GPS puck will need relocating in this case.

To get the wires for the ESCs to connect to the correct side of the N3, I'll need to have the arrow pointing backwards.  I doubt this will be too much of an issue - @DJI-Jamie?
2016-12-11
Use props
Tom
lvl.2

United Kingdom
Offline

A question for support - is it possible to buy the modified (upgraded) Top plat that seems to come with newer S900s? This would make mounting my N3 a lot easier.
2016-12-21
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Tom@Rotorworld Posted at 2016-12-21 19:50
A question for support - is it possible to buy the modified (upgraded) Top plat that seems to come with newer S900s? This would make mounting my N3 a lot easier.

Perhaps through a dealer, right now frame parts on the DJI Website are a tad limited.
2016-12-21
Use props
Tom
lvl.2

United Kingdom
Offline

DJI-Jamie Posted at 2016-12-21 20:04
Perhaps through a dealer, right now frame parts on the DJI Website are a tad limited.

Thanks Jamie,

My UK dealer couldn't guarantee if they ordered me a top plate if it would be original type or revised as the P/N is the same
2016-12-22
Use props
Wolle
lvl.4

Germany
Offline

Is ist possible to mount the N3 like in the photo and not on the top plate?

So it will be safer and I can use the S900 GPS mount

Regards
Wolfgang
IMG_20180828_184729.jpg
2018-8-28
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules