Coffee
lvl.1
United States
Offline
|
DJI-Jamie Posted at 2016-12-14 20:30
Have you tried performing an IMU calibration and then a gimbal calibration in that order to ensure the unit knows what level is?
Hey Jamie, so here's what I did, I did the latest update right out of the box because I thought I had to to start the drone. After the FW update I then did calibrations, the gimbal was giving me problems ever since that point. In the other thread I watched the videos and downgraded my FW 3 versions before I saw the change back to normal! So now I believe I'm on .50 FW and once I downgraded I was getting IMU errors and the aircraft was telling me to calibrate it. I calibrated, then I calibrated the gimbal automatically and now everything seems to be working just fine. My concern is not having he current firmware and missing out on the other fixes but obviously this problem was more important to fix for me.
I hope DJI notices this issue and fixes it with the next update. I hope this also helps anyone who has the P4P and is experiencing the same problem. Thanks again for the help Jamie, and especially for those who posted videos and threads about the same issue, I would've been super bummed having to send it back. On a side note online chat customer service was horrendous and I would revamp that whole operation if DJI is listening.
MR |
|