YellowAstra
lvl.2
Flight distance : 1834193 ft
Switzerland
Offline
|
I have flown my Mavic now for about 383km and I used Periscope while doing so!!!!!!!!
So trust me when I say how it's done.
You need 2 devices to accomplish that, two Phones or one Tablet and one Phone.
The First device is connected to the Mavic RC Controller as usual this device needs a Hotspot or Wifi connection.
The second device there is the Hotspot running for the first Device aka Tablet or Phone and further on this device you run actually the Periscope app.
First create under the Periscope Producer tab a New Stream on the 2nd Phone were you run the Periscope app later.
Copy the Stream ( rtmp://en.pscp.tv:88/x/43 ) and put it somewhere like whatsapp so you can see the whole stream and then go back and copy the stream pwd ( dfurtnvberoz ).
Now merge this two together so they look like this: rtmp://en.pscp.tv:88/x/43/dfurtnvberoz after the stream there is this / backslash needed before you write the pwd.
No put that stream/pwd into your custom rtmp in your DJI Go4 app on the first device.
Then start connecting Mavic RC and the DJI Go 4 app phone or tablet first, that Phone or Tablet must be connected to the second phones Hotspot or at a wifi.
Then start the Mavic itself up, when you see the Camview of your Mavic in the DJI Go 4 app then go to the Menu right side corner scroll down where you put the rtmp stream in before and push continue and then start. if it says no connection to that rtmp stream get sure you have inernet connection on that phone thru hotspot or wifi use and control if the stream is correct and pwd the try again.
When it's connected then go to the second phone and start running the periscope app go to the Producer tab and when it comes up with a red fault you can't start the stream then go back to the phone or tablet that is connected with the RC Video stream and change the resolution to the minimum 720p, Then try again in the second phone that runs periscope to start the stream in producer again.
After the producer stream in periscope started you can go back to the phone or tablet that is connected with the Mavic RC and change Video settings again to whatever resolution you want to record on the SD card.
Use custom rtmp streaming on the Mavic Dji Go 4 app.
|
|