djiuser_M3WjnCpEHKLI Posted at 2018-2-15 07:19
I bought yesterday one Samsung tab s2 (T813) and try to connected with DJI GO 4 and LITCHI and did not connected. The USB connection requested are flashing and you cannot choose the selection. I found a solution: Connected everything and then restart the tablet, I will work. You need to do the restart every time you want to use the DJI GO 4 or LITCHI

You could try the suggestion posted here:

https://forum.dji.com/forum.php? ... p;extra=#pid1245256

It works for me every time. Whether using DJI Go4  or Litchi.
Phantom 4S with Galaxy Tab S2 8 inch

I have no problem with Android 6. After updating to Android 7 I can no more connect to my Rc. The big problem is in fact the discussion between Apple and DJI.

THIERRY DESMEDT Posted at 2018-6-12 00:41
I have no problem with Android 6. After updating to Android 7 I can no more connect to my Rc. The big problem is in fact the discussion between Apple and DJI.

How so? Apple has nothing to do with Android.

Can't Beleive this is still a problem, been away for a couple years and this was an issue then.... Really think Apple has some control over DJI and they are not going to fix this issue... Ever... Shouldn't still be an issue 2 years later and I will never buy a piece of apple proprietary junk... EVER

The P4P does not have a compatible ANDROID tablet according to DJI yet theres 4 ipads, granted, theres a lot more ANDROID phones though, but many want something bigger than a 5 inch screen

Compatible with Samsung S9+, Samsung S9, Samsung S8+, Samsung S7, Samsung S7 Edge, Samsung S6, Samsung S6 Edge, Samsung Note 8, Huawei P20 Pro, Huawei P20, Huawei P10 Plus, Huawei P10, Huawei Mate 10 Pro, Huawei Mate 10, Huawei Mate 9 Pro, Huawei Mate 9, Huawei Mate 8, Honor 10, Honor 9, Vivo X20, Vivo X9, OPPO Find X, OPPO R15, OPPO R11, Mi Mix 2S, Mi Mix 2, Mi 8, Mi 6, Redmi Note 5, Google Pixel 2XL, OnePlus 6, OnePlus 5T.

even removed the Note 4 now

Hi,
Here is the solution:
Entering the service mode, you need to change the USB mode.
The following must be done.
You will need to enter a calculator and enter it (+30012012732+ and then press + and then enter the code input interface, then type * # 0808 # to enter the USB configuration interface, instead of the original MTP instead of the RMNET + DM + MODEM must be selected and then OK. If this is the case, then if you connect the DJI line, you have to work immediately on the connection.