hi,,, my Mavic Pro is shaking violently while hovering. it sometimes shakes then remains stable for a while then resumes shaking if i move it. I caliberated IMU and updated software/firmware but the problem wont go away. Can anyone help? Thank you

Check your props for damage.

Indoor or outdoor?

make sure you don't have the propeller cage option enabled in the DJI GO app.

Have you had any luck? I am experiencing the same thing, I've tried everything to fix it to no avail. DJI tech support won't respond to me.

mscarohaley Posted at 2017-1-17 21:19
Have you had any luck? I am experiencing the same thing, I've tried everything to fix it to no avail. DJI tech support won't respond to me.

check in the DJI app that the propeller cage is not activated this is the cause for the shaking.

If it is not the propeller cage setting set to "On" then try reseting all of the user selectable parameters to default. Some folks reported this after screwing with some of the EXP or gain settings and a reset resolved the issue.

Please make sure that the propeller cage option is disabled in the DJI GO APP. And then check whether the props are in good form. And also the GPS signal may affect the hover stability.

I have the same problem. Could it be that one reason is when outside is less than 0 degree? It hapens to me often when it was -4 degree.

They have stated there is performance issues at colder temps.  That's why they built in the heating element into the inspire 2.  Only other advice I can say is check the firmware, they did an update to reduce gimble shudder.

see my video to see if its the same problem you are having... I was able to resolve.

13MStang Posted at 2017-1-18 05:31
see my video to see if its the same problem you are having... I was able to resolve.

https://www.youtube.com/watch?v=YwqG9X4A23E

That´s exactly how my Mavic behaved when I switched on the prop-cage-button in DJI GO app settings. After switching it off Mavic flew as ever ...................... Check if Prop-Cage-Button is SHUT OFF in the settings !

GUYS.... PROPELLOR CAGE.... unchecked the propeller cage and the problem was solved.


TURN OFF PROP CAGE SWITCH

oh and THANKS to all responses... cheers

problem resolved guys.... just switch off PROP CAGE

alkhaled Posted at 2017-1-18 08:07
problem resolved guys.... just switch off PROP CAGE

I switched mine off a couple of days ago, didn't help. I went back today to check it again, and now the option can no longer be found anywhere on either app (DJI Go or DJI Go 4). Where at in your app do you find the setting? I have searched high and low today