Gimble shake apon stopping
768 6 2017-1-18
Uploading and Loding Picture ...(0/1)
o(^-^)o
Apriliamgt
lvl.4
Flight distance : 1155823 ft
  • >>>
United Kingdom
Offline

As the title says,

I've had a replacement mavic from dji Netherlands .. but seems my gimble is shaking/twitching apon letting go of the sticks and then the gimble settles itself again once stopped.

I did all the calibration and did a test flight during the day and didn't have this issue during the day.

Had a flight later on in the day (night time ) temputure was colder at this point and the gimble started to do it again.
After a few minutes of flight , the issue seem to have reduced

Reduced the braking of the mavic ..

Also seems an issue in sports mode and not gps .. so only happens when the mavic gets upto speed.
2017-1-18
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

We cannot guarantee the performance of the gimbal in sport mode.
What kind of temperature were you flying in?
And could you please clarify your current firmware version?
2017-1-19
Use props
Apriliamgt
lvl.4
Flight distance : 1155823 ft
  • >>>
United Kingdom
Offline

Well it was about 5*C outside so not below freezing .

And the firmware is the most current
2017-1-19
Use props
ePetLicensing.c
lvl.4
  • >>>
United States
Offline

Apriliamgt Posted at 2017-1-19 02:51
Well it was about 5*C outside so not below freezing .

And the firmware is the most current

Did you get warning sound from the app about high wind affecting the gimball?


Protect animal population. Spay or Neutered your Pet!
2017-1-19
Use props
Apriliamgt
lvl.4
Flight distance : 1155823 ft
  • >>>
United Kingdom
Offline

I was getting the problem again earlier . I'm sorry this is going back to dji..
my last mavic did not have this issue and it's getting rather annoying
2017-1-19
Use props
Apriliamgt
lvl.4
Flight distance : 1155823 ft
  • >>>
United Kingdom
Offline

And no, no noises
2017-1-19
Use props
Apriliamgt
lvl.4
Flight distance : 1155823 ft
  • >>>
United Kingdom
Offline

Did a firmware refresh and all the calibrations . Also had my friends mavic up at the same time .

His camera was not displaying non of the issues I was having ..
2017-1-19
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules