We kinda knew we might run into this problem going in..  Our 2 INSPIRES arrived a couple of days ago and as we go through set up, everything is going fine until the Android APP turns on.  The Status says "Not Connected" yet the craft LED indicator says its connected and the led on the remote says its connected.  The APP is up, its just not seeing the UAV.  Yes the USB is plugged in from remote to tablet.  But there is no camara video and the status is like the copter is not even there..?     Now, like I said, we wondered about this up front because, the brand new tablets we have are not on the "approved" list, which was not out when we placed our inspire orders...   So now I wonder is its an incompatibility problem with the Android tablets or are we missing something else?

Any advice would be greatly appreciated...  (NOTE:  Once we solve this problem, we will update this post with the fix.)

Drone Video Productions LLC
http://dronephotography.weebly.c ... /hiring-pilots.html
NOTE:  Password is   INSPIRE

Android tablets  need activate the developer mode ans USB DEBUGGING.

I think you answered your own question.

above are correct. You need to activate usb debugging mode to communicate via usb.

UM305 Posted at 2015-2-18 04:10
Android tablets  need activate the developer mode ans USB DEBUGGING.

Yes we turned on USB debugging and no change..?

Is you camera attached?  If not it will show as disconnected.

Tahoe_Ed Posted at 2015-2-20 01:07
Is you camera attached?  If not it will show as disconnected.

Hi Ed,  Yep it all set up to specs and when we place and Android phone on it.  It works perfect.   Even the HDMI output to monitor works as well.   But still no dice on getting it to display connect to the Android tablet.  The APP comes up and shows all the controls but it is like the remote is not even there or the copter, which are both there and on and ready to fly but its not connecting.

Mowog2 Posted at 2015-2-18 04:11
Have you turned on USB debugging?

Are they NEXUS 7 Tablets?

No they are ONDA V975m  models.  We have 4 of them.  They all have the same issue.  Here are some of the specs:
CPU:  Amlogic M802 2.0GHz Cortex A9 Quad core
GPU:  Mail 450mp Octa Core
OS:  Android 4.3
RAM:  2GB DDR3
ROM:  16GB
SCREEN:  9.7 Inch Retina IPS Capacitive Screen
VIDEO:  4k(4096 x 2160px),support BlueRay 3D video, AVI/MOV/MP4/RMVB/FLV/MKV
PORTS:            
1 x Micro USB port
1 x TF card slot
1 x Micro HDMI port
1 x 3.5mm Earphone port
LINK to more specs:  http://www.banggood.com/Onda-V97 ... ablet-p-917932.html

Tahoe_Ed Posted at 2015-2-20 01:07
Is you camera attached?  If not it will show as disconnected.

Ed.  Take a look at the other post if you would that we just made with more details and tell me if you can think of anything?

Drone Video Productions

If the Android phone works, that tells me that the system is functioning properly.  Your devices is currently not supported per the devices list.

Tahoe_Ed Posted at 2015-2-20 12:37
If the Android phone works, that tells me that the system is functioning properly.  Your devices is  ...

We thought as well, just wondered if you knew a work around.

DVP