Hi guys,

My RTH is still not working... when i click the return home button, it only goes higher. Everything is ok with the drone; latest firmware, right RTH settings, everything calibrated and so on. The drone just don't move horizontally towards me, it only goes very high like 140meters...
Someone knows what the problem is and how to fix it?
thanks a lot!

What happens when it gets to 140 meters?  

Sounds like you might have set the RTH height higher than the maximum height allowance setting?  Just guessing.  

Mark The Droner Posted at 2017-1-29 05:44
What happens when it gets to 140 meters?  

Sounds like you might have set the RTH height higher than the maximum height allowance setting?  Just guessing.

It just keeps going higher! Nothing happens.

And no, my RTH height setting is only 40 meters. Thats why i don't understand why he keeps going higher.

I've read tens of thousands of posts over the past 18 months and I've never heard of this problem...

You might try an IMU calibration.  

If that doesn't help, I'd contact DJI.  

Mark The Droner Posted at 2017-1-29 07:22
I've read tens of thousands of posts over the past 18 months and I've never heard of this problem...

You might try an IMU calibration.  

Okay i will try and let you know. Thanks for your time

Mark The Droner Posted at 2017-1-29 07:22
I've read tens of thousands of posts over the past 18 months and I've never heard of this problem...

You might try an IMU calibration.  

Works!! IMU Calibration did the job!! thanks!!