what would keep the Dji assisstant 2 from working properly this is as far as it responds. see pic any help please it doesnt respond when aircraft is plugged into my computer

Is the aircraft powered on?

yes aircraft is on

Wilddeer Posted at 2017-2-11 20:39
yes aircraft is on

What are you trying to do with DJI Assist 2 anyway?   You can do most of the updates via the controller.

Try another usb-cable.

I think the cable that came with the combi-charger is a charging-only cable for the remote. Which is a really stupid move from DJI. Imagine if you didn't found out about this until traveling or hiking somewhere deserted and it was the only usb-cable you had packed in your bag? I threw mine in the garbage can as soon as I found out about this, to avoid such a situation some day...

Wilddeer Posted at 2017-2-11 20:39
yes aircraft is on

Are you using version 1.0.9?

Try "running as administrator", usually right-click and select "run as administrator".

To communicate with the aircraft or RC, the DJI Assistant uses a special set of plug-n-play drivers that normally get installed along with the Assistant from C:\Program Files (or Program Files(x86) depending on your PC)\DJI Product\DJI Assistant 2\Drivers.... The various driver files are in folders and there are two batch scripts, one of which is run during the installation.

Do you recall being prompted to install the drivers during the DJI Assistant Installation?

I was trying to update avoidance system cameras and advise me to use DJ assistant 2 to maximize calibration and yes I was using the DJI cable for the charging the remote

I will try different USB and thanks you all

I had the same thing. Get it plugged into computer, launch Assistant, then power on the bird. That sequence solved my issue

Try plugging in bird, launch Assistant, then power on bird

I had the same, tried everything. The below, posted by Bullseye, did the trick.

http://forum.dji.com/forum.php?m ... &fromuid=457629

May I know you've got it sorted out or not?

2/13/17 I will try the power on after I lauch app and see what happens will try today after 5pm. Thanks

2/13/17 I will try the power on after I lauch app and see what happens will try today after 5pm. Thanks And if i can ask I install a 64 gb sd card and i noticed the HD signal meter was blinking i looked in user man. and didnt see anything on how to fix or what it means

Wilddeer Posted at 2017-2-13 09:34
2/13/17 I will try the power on after I lauch app and see what happens will try today after 5pm. Thanks And if i can ask I install a 64 gb sd card and i noticed the HD signal meter was blinking i looked in user man. and didnt see anything on how to fix or what it means

If you mean the hd symbol with the signal bars?
Means there is some interference. Can also occur with the rc symbol. Is normal, safe to fly.

Thank u on the HD Signal status

Is there a way to turn off the usb charging mode when my RC is plugged into my S7 samsung I think its draining my RC batt. ?