markus2015
Second Officer
Germany
Offline
|
You can't pair the RC through the assistant software. There is a small round hole (link indicator) next to the rear left leg under the phantom. Push a pen or something into that hole to bind your phantom to another remote controll.
Linking Procedures:
1.Power off the Remote Controller, power on the aircraft. You will see the link indicator blinking red.
2.Press the link button with a thin object and hold until the link indicator blinks yellow. Release the link button.
3.Power on the Remote Controller. Link indicator will switch off, showing that a link has been successfully established.
The callibrate your RC. Check out JDI's wiki for more detail:
http://wiki.dji.com/en/index.php ... e_Remote_Controller |
|