Good afternoon, after the latest update my p3s always is showing the intereference warning and it's range has dropped almost in half. Also it takes a long time to set a home point and it won't allow me to set a home point. The antenna seems very loose. I am not sure if a loose connection possibly?
Thanks

did you update firmware or go app? I downgraded my go app back to 2.9 and the problems went away. I'm running firmware 1.79 with no problems

How do I do that, am not quite sure of the process? Thanks

what firmware are you running for the phantom? Also for the app.

Orlando_Jeff Posted at 2017-2-17 16:04
did you update firmware or go app? I downgraded my go app back to 2.9 and the problems went away. I'm running firmware 1.79 with no problems

Howd you downgrade the app.  I did back to 2.9 and it forced me to upgrade back to 3.1.3.

LMAC21074 Posted at 2017-2-18 04:33
How do I do that, am not quite sure of the process? Thanks

the app is 3.1.5
the aircraft is 1.8.10

Delete the go app and install the 2.9 app. After that, make sure the settings in your phone for the go app do not allow notifications. If t does, it will upgrade the latest app. As for the firmware, I have heard lots of bad things about the new firmware. I don't think you can downgrade that.

Hello. I am the owner of Phantom 3 Standard. I'm having problems after a software update. Updated version from 1.6.8 to 1.8.1.
During the update, accidentally turned off the remote control. Then quadrocopter started beeping loudly and gave an error. Re-issued update: successfully.
Restart the RC and quadrocopter. On the screen was the message: signal lost. After that I made a re-linking RC. LEDs light up green.
Quadrocopters started to fly. But there was trouble. After each lost link quadrocopters off and the remote control. And copter stopped flying on 50 meters.
Please tell me what to do.
sorry for my English
Thank you.

Orlando_Jeff Posted at 2017-2-18 17:20
Delete the go app and install the 2.9 app. After that, make sure the settings in your phone for the go app do not allow notifications. If t does, it will upgrade the latest app. As for the firmware, I have heard lots of bad things about the new firmware. I don't think you can downgrade that.

I have the same problem. when I download the 2.9 version and turn it on, the program forces me to update it.