Hello,

Today I noticed my first gimbal motor overload causing the camera to rotate tilt sideways and down.  It was slightly windy and I was in sport mode making quick movements.  How common is this and is this normal ???

Hi, it's normal for it to show up if you're close to the limit of the gimbal.   But does the warning go away?

DJI-Thor Posted at 2017-2-19 20:11
Hi, it's normal for it to show up if you're close to the limit of the gimbal.   But does the warning go away?

Yes, the warning goes away after the camera acts like it's falling off the p4p.  It resets then appears to be fine would only do it if I had a head wind and turned left.  The camera would rotate and a quarter turn clockwise

Hi I also have gimbal motor overload issues. the gimbal just tilted to the max when turned on. There was one time I forgot to remove the foam pad protector in gimbal when turn it on, and just remove it right after. It begin the problem with gimbal motor overload, but when i poke the gimbal it just went normal for 2 flights. but now it is almost permanent and IMU calibration with gimbal calibration sometimes cure it but must be done every time I start the aircraft.

Has anyone facing a similar issues?

Phantom gimbal making me headache... =(

Here's a clip

Teamrealtree5 Posted at 2017-2-24 18:34
Here's a clip

https://www.dropbox.com/sh/xlzqp469clczv6x/AAA8-jNxyojxmr5lIueXQnawa?dl=0

My drone is a p4p btw

https://youtu.be/MFc2IN63j-4