Has anyone of You have 1.8 firmware file?
I've uptated my aircraft to 1.9 whitch have a lot of issues so I have to downgrade inspire RAW.
I can't found any link on the DJI site and other places.

http://www.panorobot.com/dji/inspire_firmwares.htm

Zip file download from DJI @https://dl.djicdn.com/downloads/ ... FW_V01.08.01.40.zip

MD5 hash for .\WM610_FC550R_FW_V01.08.01.40.bin: 47e9d7cf0fb9929de5552217bec0bdba

What kind of issues are you experiencing. Just to clarify, the latest firmware is v01.10.01.40.

Daroga Posted at 2017-2-24 13:19
Zip file download from DJI @https://dl.djicdn.com/downloads/ ... FW_V01.08.01.40.zip

MD5 hash for .\WM610_FC550R_FW_V01.08.01.40.bin: 47e9d7cf0fb9929de5552217bec0bdba

Thanks! Problem solved

DJI-Jamie Posted at 2017-2-24 16:12
What kind of issues are you experiencing. Just to clarify, the latest firmware is v01.10.01.40.

DJI Go app is not connecting with aircraft in latest firmware, I've done update on controllers also but it's not solved anything. Downgrade solved problem, every update after 1.2 is really bad. So I stay on 1.8 that long as I can.

bob_budowniczy Posted at 2017-2-28 06:21
DJI Go app is not connecting with aircraft in latest firmware, I've done update on controllers also but it's not solved anything. Downgrade solved problem, every update after 1.2 is really bad. So I stay on 1.8 that long as I can.

To clarify, did you update the aircraft first and then the RC or vice versa?  When you're saying it's not connecting, do you mean that it won't allow you into the camera view or that when you do, it just says 'disconnected'?

bob_budowniczy Posted at 2017-2-28 06:21
DJI Go app is not connecting with aircraft in latest firmware, I've done update on controllers also but it's not solved anything. Downgrade solved problem, every update after 1.2 is really bad. So I stay on 1.8 that long as I can.

You may have simply needed to do a relink once you updated the aircraft  and the RC.  
sometimes they disconnect after an update.  When UPDATING , ALWAYS DO THE AIRCRAFT FIRST , THEN THE RC TRANSMITTER, IF YOU DONT , IT CAN GET VERY UGLY FAST .

donnie

If you haven't done it yet, please try Donnie's advice and see if it helps.

Donnie Stugots Posted at 2017-2-28 09:44
You may have simply needed to do a relink once you updated the aircraft  and the RC.  
sometimes they disconnect after an update.  When UPDATING , ALWAYS DO THE AIRCRAFT FIRST , THEN THE RC TRANSMITTER, IF YOU DONT , IT CAN GET VERY UGLY FAST .

Hi donnie,
I have seen you across multiple forums and am hoping you can help with my issue. I recently purchased an inspire 1 with an x3 and an x5. When initially launching dji go app and powering craft/ remote i was prompted to update the remote. Which i now see is not what i should have done. I then browsed forums to fix all the new issues that caused and rolled the rc firmware back to 1.6.0 and then updated my ac and x5 to the newest firmware 1.11.1.50 . I then finally had connection between the drone and rc but had a extemely laggy display on dji go app. I tested a recording anyways to be sure the x5 was in working order and everything looked great. I then saw i should update the rc in a forum and now have no image.

Also Im having an issue where the landing gear motor continuosly sounds like it is lowering and i have not been able to get the landing gear to engage once since purchased. I have also read and heard from dji support that this may be fw issue.

Thanks in advance!