Hi! I ussually shoot my video in FullHD resolotion so I use the same in Mavic. But I not satifacted with result. All the trees in video are blured and look like aquarel painting. The same time all edges of figures are oversharpened. Can somebody look to footage and give me some advice how to improove my picture?
I dont know may be FullHD in Mavic has some limitation? But it looks much worse then GoPro full HD.

I guess you just joined the forum. This issue is being discussed actively here. All Mavics have this issue however some people just dont notice this problem and some choose to accept this quality!

Look at this thread: https://forum.dji.com/thread-84156-1-1.html

alirz5 Posted at 2017-2-25 08:46
I guess you just joined the forum. This issue is being discussed actively here. All Mavics have this issue however some people just dont notice this problem and some choose to accept this quality!

Look at this thread: https://forum.dji.com/thread-84156-1-1.html

You're right, I'm new here. I tried to find similar discussion but searching so strange here. Thank you for reply!!!

It gets worse when areas are under-exposed - which the trees are in this due to the snow cover.

The Mavic's camera stack needs lots of light to perform optimally.

I'm not sure what you mean by "Full HD." Were you filming at > 30fps? There's some strobing going on that's a known characteristic of >30fps 1080p video. Most of us shoot at 2.7K or 4K which will give you much sharper video in decent light.

I used 1080p 60fps. As far as I understood from thread: https://forum.dji.com/thread-84156-1-1.html - it is the worst settings I would prefer. 30fps should be much better, but today I tested all settings and you're right - 2.7K much sharper. I will use it for future.

Don't use 1080p... 2.7K looks fine.