Please select Into the mobile phone version | Continue to access the computer ver.
Inspire 1 1.10.01 Firmware upgrade fail
2272 7 2017-2-25
Uploading and Loding Picture ...(0/1)
o(^-^)o
Heavydpj
lvl.2
Flight distance : 611027 ft
United States
Offline

Actually, not even fail.  I don't get that far.  I have followed the tutorial to the letter.

I have downloaded the correct file from the Inspire 1 Support Website (Inspire 1 Firmware v01.10.01.40(X3)
I have re-formatted the Micro SD card
I have placed the .bin file (WM610_FW_V01.10.01.40.bin) on the card
I have inserted the card into the Inspire 1 X5
I Have turned on the aircraft
I have NOT turned on the remote controller

Every time, the Inspire 1 Pro goes through its opening sequence like normal. Without even an attempt at upgrading.

HELP!
2017-2-25
Use props
Henry M.Y.
Second Officer
Flight distance : 11548839 ft
  • >>>
Hong Kong
Offline

You downloaded the wrong FW file, so could not upgrade your Inspire 1 Pro's FW.

In DJI's Inspire 1 download website, there is a pulldown menu where you should pull down and select Zenmuse X5, after which the correct download links will appear. The latest Inspire 1 Pro FW download "Inspire 1 Pro Firmware v1.10.1.40" has a filename of "WM610_FC550_V01.10.01.40.bin.zip". You have to upzip the file to extract the bin file for placing it into the Inspire 1 X5 and proceeding with the upgrade.

Henry
2017-2-25
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Like Henry mentioned, you have to use the Inspire 1 Pro firmware if you have the X5 camera.
2017-2-25
Use props
Donnie Stugots
First Officer
Flight distance : 3636782 ft
United States
Offline

Henry M.Y. Posted at 2017-2-25 17:30
You downloaded the wrong FW file, so could not upgrade your Inspire 1 Pro's FW.

In DJI's Inspire 1 download website, there is a pulldown menu where you should pull down and select Zenmuse X5, after which the correct download links will appear. The latest Inspire 1 Pro FW download "Inspire 1 Pro Firmware v1.10.1.40" has a filename of "WM610_FC550_V01.10.01.40.bin.zip". You have to upzip the file to extract the bin file for placing it into the Inspire 1 X5 and proceeding with the upgrade.

Nailed it Henry , 10 points for you my friend !!

donnie
2017-2-26
Use props
Heavydpj
lvl.2
Flight distance : 611027 ft
United States
Offline

Thanks gentlemen!  I was wondering why the file had (X3) at the end of it, and had a hunch that it may be the problem.  All is good to go now.  

Again, MANY thanks!
2017-2-26
Use props
Fix
New

Nigeria
Offline

Hello, pls can I get a copy of the version 1.10 firmware
2017-9-1
Use props
Donnie *
First Officer
Flight distance : 3636782 ft
United States
Offline

Fix Posted at 2017-9-1 04:44
Hello, pls can I get a copy of the version 1.10 firmware

What camera system are you using X3, X5, X5 raw , etc ?




2017-9-1
Use props
RichJ53
First Officer
Flight distance : 1837356 ft
  • >>>
United States
Offline

Henry M.Y. Posted at 2017-2-25 17:30
You downloaded the wrong FW file, so could not upgrade your Inspire 1 Pro's FW.

In DJI's Inspire 1 download website, there is a pulldown menu where you should pull down and select Zenmuse X5, after which the correct download links will appear. The latest Inspire 1 Pro FW download "Inspire 1 Pro Firmware v1.10.1.40" has a filename of "WM610_FC550_V01.10.01.40.bin.zip". You have to upzip the file to extract the bin file for placing it into the Inspire 1 X5 and proceeding with the upgrade.

Good eye Henry...

spot on!
Rich
2017-9-1
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules