so i did crush my mavic after a few weeks of flying

the drone itself is working great and the gimbal also the problem is in the camera sensor

whene the drone fall down from the tree i hit 2 small tiny cables was disconected from the board and now the camera isnt working =\

is there some one that selling that part or know some thing that can help me?

You have to send it for repair!

dronist Posted at 2017-3-7 08:49
You have to send it for repair!

I am sure he knows he can send it for repair, but is obviously looking to try and do it himself.  So I guess your response with the "exclamation" mark at the end is not really helpful, that is unless he didn't realise he could send it for repair.

Lol how are your micro soldering skills?

geofox784 Posted at 2017-3-7 09:20
Lol how are your micro soldering skills?

my mother is a pro its her job for that past 24 years ... but even she cannot do this its no soldered its pressed with a machine =\

the problem by sending the drone is that when it will get back i will not get it because its illegal here in my country =\

fansbe0d18d1 Posted at 2017-3-7 09:25
my mother is a pro its her job for that past 24 years ... but even she cannot do this its no soldered its pressed with a machine =\

the problem by sending the drone is that when it will get back i will not get it because its illegal here in my country =\

I was half joking when I said that.

How did you get it originally? What is your country?

SteveDickin Posted at 2017-3-7 09:15
I am sure he knows he can send it for repair, but is obviously looking to try and do it himself.  So I guess your response with the "exclamation" mark at the end is not really helpful, that is unless he didn't realise he could send it for repair.

Oh, sorry!!!!!!!!!

I did NOT know you are the "EXCLAMATION MARK"  

You know what they say about ASSUMING?

SteveDickin Posted at 2017-3-7 09:15
I am sure he knows he can send it for repair, but is obviously looking to try and do it himself.  So I guess your response with the "exclamation" mark at the end is not really helpful, that is unless he didn't realise he could send it for repair.

You see... He spoke for himself and he did NOT need  a spokesperson did he  

Wait! did you just post twice, some meaningless nonsense, one hour apart and nobody responded.... you bored?

Hello.

Make a search on YouTube for: teardown mavic
Suppose you can see the color of the wires into the connector on the video. Good luck to.

Regards Leif.

Ups. Double post.

geofox784 Posted at 2017-3-7 09:35
I was half joking when I said that.

How did you get it originally? What is your country?

from israel its on the same frequency that is used by the govermant here

https://support.dji.com

log in and look for accessory parts for the mavic.  Looks like you can buy the whole thing or parts of the gimbal.

SteveDickin Posted at 2017-3-7 14:45
Wait! did you just post twice, some meaningless nonsense, one hour apart and nobody responded.... you bored?

Wait!!! Did you just responded to my post

and I thought you would be so busy "TROLLING"... Sorry I mean "ATROLLING", sorry again, I mean doing you job with the "EXCLAMATION ENFORCEMENT POLICE DEPARTMENT"...