Please select Into the mobile phone version | Continue to access the computer ver.
help remote blanks red
382 2 2017-3-10
Uploading and Loding Picture ...(0/1)
o(^-^)o
fansce81b7e5
lvl.2
Flight distance : 202566 ft
United States
Offline

I have a new p3p and I was setting it up and the remote blinks red, I have linked the remote to the rc .. I don't know what is wrong and anyone help... thanks
2017-3-10
Use props
fansdc5014de
lvl.2
Flight distance : 8235 ft
Spain
Offline

Did you a firmware update.?
2017-3-10
Use props
DJI-Jamie
DJI team
Flight distance : 112405 ft
United States
Offline

Please ensure that the firmware is up to date with the aircraft and that the RC is fully charged. In addition, you can try the following button combinations in order to refresh the RC.

Reset the RC of any odd presets:
* Turn on the controller, and the aircraft should be off.
* Press C1, C2, and shutter on the controller then turn the controller off.
* Turn on both the aircraft and the controller and link the remote.


Manually relink the RC to the aircraft.
* Turn on both the aircraft and the controller.
* Press C1, C2, and the record button on the controller, then the controller will beep like D-DD.
*Let go all fingers, press the wheel on the right side of the controller and then the first light of the controller will become blue and it will constantly beep DDDD.
* Use a pen to click the linking button on the aircraft and hold for 3-5 seconds, and then take the pen off the aircraft and wait, it will be linked soon.
2017-3-10
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules