Hi,

Last week I finally received my DJI Mavic Pro.
I plugged in my iPhone and the IMU calibration did not went very well.
It does not go further than step 2 of the process.
After 40 minutes I had to turn the Mavic off, because the battery was getting low.

Does somebody have an idea how to fix this?

Best regards,

Joshua.

Hi Joshua, I have a similar story after installing latest firmware on P4P Pro. Tried reinstalling everything and doing recalibration in different locations

Are you watching the screen of your DJI GO 4 app. You need to keep changing the position of the Mavic according to what is on the screen. If you don't change the position when required. nothing further will happen. And the Mavic has to be placed on a level surface exactly as shown on the screen.

Jenee 2 Posted at 2017-3-11 20:07
Are you watching the screen of your DJI GO 4 app. You need to keep changing the position of the Mavic according to what is on the screen. If you don't change the position when required. nothing further will happen. And the Mavic has to be placed on a level surface exactly as shown on the screen.

You are entirely right...
I had to change the position of the bird.
I wasn't aware that you have to change the position.
With the DJI Phantom 4 I can't remember how I did the IMU calibration.
It's something you don't do very often.