Phantomski
lvl.4
Flight distance : 14869882 ft
United States
Offline
|
RC and quad are the only things that need pairing. The tablet is another story. Try a diff cable, make sure usb debugging is on on Android. Try to remember if either the OS on the tablet updated, or perhaps the GO app updated the RC firmware, but u did not follow with updating the aircraft? (although that would usually cause the radio not to connect either, so a red LED on the controller, and no control over the craft.
Try to exit go app, with everything else on, then disconnect and reconnect the cable, see if the app comes up - sometimes the usb port on the radio could go bad? Let's see - what else do I recall... Ah, sync all your flight logs to dji cloud,m then remove the go app, reboot your tablet, install the app again. If u can, wiping the tablet may be good too, clearing some caches? Once u r back, your records can be synced back from the cloud.
Things like that.... Definitely another USB cable would be one of the first things i'd try.
Ah, once u boot your android device.. give it good 10 min to stabilise.. i've noticed services act funny...
Oh, also, if u got litchi, or any other flying app for dji, remove it! At least while testing! I have tried left and right, and while Litchi was installed, even though I kept killing services, I had disconnects and other issues all the time! Now I got GO on the tablet and litchi on my phone. Total separation.
|
|