Hi All.
I tried to update the P3 Firmware to v 1.10.0090 the other day, but after verifying the Log.ab file I am not sure on what version I am now.
I thought I was on 1.09.6 because when I checked on the SD card that what the version that was the .bin file that was there.
But the LOG_AB files seems to say differently.
Here is a copy of the Update attempt from the Log File.

[00013239]Delete history success.

[00014287]========== 2017.03.27 20:16:13. boot(15) ============
[00014370]Packet [C:\P3X_FW_V01.10.0090.bin] detected, card sn [0x2810dab5].
[00014464]Packet upgrade start...

[00014559]Packet checking...
[00014637]Packet vlink 01.10.0090 <-> 01.10.0090.
[00014719]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00014794]Done.

[00014877]Version checking[1]...
[00014981][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015105][03 06][00] v2.4.20.28 -> v2.4.20.28
[00015198][04 00][00] v1.48.0.0 -> v1.48.0.0
[00015361][11 00][00] v1.8.0.0 -> v1.8.0.0
[00015520][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00015593][11 01][00] v1.8.0.0 -> v2.0.0.33
[00015737][12 00][00] v1.11.0.0 -> v1.11.0.0
[00015854][12 01][00] v1.11.0.0 -> v1.11.0.0
[00015975][12 02][00] v1.11.0.0 -> v1.11.0.0
[00016126][12 03][00] v1.11.0.0 -> v1.11.0.0
[00016315][15 00][00] v1.1.2.0 -> v1.1.2.0
[00016450][17 00][00] v1.1.1.7 -> v1.1.1.7
[00016615][17 01][00] v1.0.2.7 -> v1.0.2.7
[00016728][19 00][00] v1.0.8.96 -> v1.0.8.96
[00016803][01 00][00] v1.32.5432 -> v1.32.5432
[00016888][01 01][00] v1.32.5432 -> v1.32.5432
[00016971][08 00][00] v0.13.0.7 -> v0.13.0.7
[00017087][09 00][00] v3.0.0.10 -> v3.0.0.10
[00017168]Packet upgrade cancelled at version checking.


I don't see any indication of v 1.09.006
Am I still on 1.8.0 should I try to upgrade to 1.09.006 before going to 1.10.90.

Thanks

Bat

I have checked with the DJI Go App (Android) and it says I am on 1.10.90 but still, reading the LOG_AB files is confusing!.

Comments?

Bat

capbat Posted at 2017-3-29 10:03
I have checked with the DJI Go App (Android) and it says I am on 1.10.90 but still, reading the LOG_AB files is confusing!.

Comments?

I am no expert, but I think the numbers on the left in your log file are referring to different hardware components. Seems like I have read this before. I do not know what they actually refer to. But, I would go for installing the latest firmware and not worry about skipping one. Some time back if you had a version that was I believe V1.3 or older, you couldn't jump right up to the latest one and had to go one by one, but I think it is not an issue with the later versions. Along with those later releases came the ability to upgrade through your WiFi and the app instead of having to use the sd-card. Someone might be able to explain what the comments are in your log file (DJI-moderator) or some more experienced person. I look at these when I upgrade, but honestly I have never had an issue, so I don't really dive into it that much. I just look for the "Success" and forget about it, or if it wasn't successful, I do it again.

Re attempt it and post the result.
And what does it say in the About page of the GO app ?