Hello guys
yesterday we encountered a problem with S1000 . In our test video we can see some vibration (Jello effect) .
The props is tightened (not overtight) normal and i can not see any other malfunction.
Could anyone give some ideas? Any help would be appreciated...
Here you can watch the video the video


Regards
Nikos

What  king of gimbal ? I have the same problem with my Homemade gimbal and DJI S900

The official one....
http://www.dji.com/product/zenmuse-z15-5d

The props should be tight enough to not fall under their own weight when held horizontal but loose enough to fold out straight. Can you please post pictures of the way the gimbal is mounted?

Here they are ...

Any idea please???

nikolaospaschal Posted at 2015-3-9 14:25
Any idea please???

you could move the gimbal to another place on your drone. Also, change other type of the vibration absorber.

Hi,
you need to guess the central tube between the 2 retracts units ( i think it is the 10th time i write it on the forum lol) , then nobody asked you, but what are your basic gains ?
S1000 Premium does not " like" gains over 110... ( Basic gains)
You might also need to change the motor dampers and install the small cup washers (like on S900 and S1000 + ).
Best regards,
Fabien

Fabien,
can you elaborate on the comment "S1000 Premium does not " like" gains over 110... ( Basic gains)".. I had mine at 110 and 120 and it wobbled in the air like a drunken sailor. Mine are set to 180; smooth and stable