So how do you put the Inspire1 in travel mode so you can send it in for repair.
Ohhh, i also want to send the transmitter as it need repair too.

rfrye Posted at 2015-3-3 23:43
Dundee,
No direct advice for you...but I have saved my shipping box and have anticipated that if I e ...

That's in travel mode then ?

Dundee,
No direct advice for you...but I have saved my shipping box and have anticipated that if I ever had to send it in...I would merely send it to them they same way I received it.

rfrye Posted at 2015-3-3 23:43
Dundee,
No direct advice for you...but I have saved my shipping box and have anticipated that if I e ...

In the menu their is a function for putting it back in travel mode after you remove the gimbal/camera. I think it is under General Settings.

rfrye Posted at 2015-3-3 23:45
In the menu their is a function for putting it back in travel mode after you remove the gimbal/cam ...

What repair issues on the craft and remote do you have if you don't mind me asking.

You can toggle the LG switch 4 times and this will get you into travel mode.

rfrye Posted at 2015-3-3 23:45
In the menu their is a function for putting it back in travel mode after you remove the gimbal/cam ...

Yeah, i wrote that the transmitter is also KAPUT
So ?

Blade_Strike Posted at 2015-3-3 23:53
You can toggle the LG switch 4 times and this will get you into travel mode.

The LG switch can't work as i wrote that also the RC is KAPUT   

dundee Posted at 2015-3-4 00:01
The LG switch can't work as i wrote that also the RC is KAPUT

You can control the legs into 'travel mode' with out the transmitter. DO NOT POWER UP the aircraft.
On the bottom of the aircraft is a screw that turns the worm gear. A small screwdriver will adjust the worm shaft to any position without powering the aircraft.

lingner Posted at 2015-3-4 00:13
You can control the legs into 'travel mode' with out the transmitter. DO NOT POWER UP the aircraft ...

Correct answer !  

Hey dundee, also keep in mind the sensor on the bottom of the aircraft really doesn't like surfaces that are soft, and patterned. When putting the Inspire in travel mode via the app, just make sure you are on a hard flat surface with no weird patterns

sorry to hear you have to go through the repair process . . . what happened if you don't mind me asking?

Acidsnow Posted at 2015-3-4 01:58
sorry to hear you have to go through the repair process . . . what happened if you don't mind me ask ...

who said i was

Was this an exam question dundee?............Discuss.

See my posting here:

http://forum.dji.com/forum.php?m ... age%3D1&lang=en

Dave E Posted at 2015-3-4 02:28
Was this an exam question dundee?............Discuss.

Yes it was.
Working on a list of FAQ for the Inspire1.

Social experiment or some casting for the next ace ventura movie.

UM305 Posted at 2015-3-4 10:38
Social experiment or some casting for the next ace ventura movie.

Sort of, just trying to narrow the knowledge gap