Please select Into the mobile phone version | Continue to access the computer ver.
Arm replacement with existing motor
816 2 2015-3-6
Uploading and Loding Picture ...(0/1)
o(^-^)o
dylan
lvl.2
United States
Offline

I purchased a replacement arm. Has anyone come across instructions or done this procedure? It looks like I have to unsolder the wiring from the motor and the control plate and then solder the new wiring on but it'd be nice to have some instructions to verify this.

2015-3-6
Use props
dennismurry08
Captain
Flight distance : 5442736 ft
  • >>>
United States
Offline

If you just got the arm and are replacing the motor then yes you will have to do some soldering. Theres not much room in there so you need to be precise. A small blurb can be found on page 25 of the owners manual: http://download.dji-innovations. ... Manual_v1.10_en.pdf
2015-3-8
Use props
dylan
lvl.2
United States
Offline

Yeah - thanks - sorted it out - quite the operation.
2015-4-27
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules