HI,

Ive just bought a phantom 4 recently not even a month, and in the first flight it appear on my monitor a warning signal that says "losse propellers". I have checked the propellers and all four were well secured. I have also  checked the screws and every single one are well tightened.

There is anything to do with the firmware? should it be update it? or should I change it for a new one as is under warranty?

thanks.     

Eirlink Posted at 2014-9-18 19:39
hello everyone....enjoy the forum. ask plenty of questions

bonjour j'ai installer des protections d’hélice sur mon dji phantom 3 et j'ai fait un vol en intérieur et mes moteur sont un peut chaud apres 5 min est ce normal??

Hi
My name is Maikel , I have a DJI Phantom 3 Advanced

Hi All!!!
My name is Eddy, I'm from LA and I have a P4 / iPadmini 4.   Where is everyone from?

Hola que tal amigos TENGO UN OSMO NUEVO Y NO ME ARRANCA EL GIMBAL A LO QUE ENCIENDO ESTA COMO MUERTO EL VENTILADOR FUNCIONA PERO CALIENTA LA CAMARA ALGUIEN ME PUEDE AYUDAR PORFA

I have a question for the DJI Company,

I'm a Photographer & Videographer and Traveler

I love my Osmo and my Drone but it only limits me to use it on land and air.

Exploring a different perspective for viewers using DJI Products was the biggest Success for me

but it is still limited. I want to do more with the DJI products especially with the DJI OSMO

if only there is a Underwater Case for it, the capabilities of angles and shots with the OSMO underwater? would be phenomenon!

no other 3rd party Products/Competitors can equate the Quality the DJI gives.

the Question is when will there be one? or will there be one?

Hello there,
I'm new to this forum and I just bought my very first DJI product. I got a DJI OSMO, so I can take incredible photos and videos of places I've visited and going to visit. I just recently went to a family friend's wedding and I took some awesome shots, however the way I shot those shots don't look like a 4K shot it looks like amateur instead of a professional 4K shot. Can someone tell me what I'm doing wrong and maybe help me out? I really want to show my talent I'm really good at take photos and video and I want to learn more and strive more. So, I hope everyone is doing ok and thanks for hearing me out.

djprez@gmail.co Posted at 2016-7-15 10:36
Hi All!!!
My name is Eddy, I'm from LA and I have a P4 / iPadmini 4.   Where is everyone from? {:4_1 ...

Hi Eddy from San Clemente  just got the p4 , have a x5 pro love the DJI products Brother
Happy Flights
Steve

Mods, I keep getting these activate via e-mail pop ups randomly when posting (about half the time) and have received about 30 e-mails from the forum asking me to click the link (which I already did) and when I try to click the link it sends I get a failed message.  

mike_71@yahoo.c Posted at 2016-7-31 03:24
Mods, I keep getting these activate via e-mail pop ups randomly when posting (about half the time) a ...

Same here. This message seems to work though but can't reply to answers on my own question which is kinda unfortunate. Gotta keep on trying I suppose.

Hello is this getting through.test

Thanks for posting this, it's 100% use full info!
Fly On!

hello im new here...only had phantom 2 a few months...i have many questions...

Hi im Scott.
just checking in; showing that i viewed here =)
Cheers!

TY for info
Scott

i have problam ph3 battry charging after flight  if stay  few hour then charge
if after flight  urgnet not charge whats problams

Hi, I am going to have my Phantom4 follow my Phamtom3!

Hello from Scotland.

I'm still deciding between P3 or P4 and ploughing through all the information I can find. So expect a flood of questions shortly.

I'm also trying to figure out the forum layout?? It seems a little different from any other forum I have used but I'll get there ... eventually. {:4_181:}

< Edit: As in the avatar is showing me as being 'Offline'.

I want to ask if Dji Phantom 2 Vision + can not send a picture to androaid? but to record and take pictures could still possibly why there can help me thanks

Hello everyone, I'm new at this and I need your help. I have everything set-up but I can't see the Phantom 3's camera on my phone. I can take pictures and it goes to my SD card but I can't see anything on my phone, Please help

Hello I'm new

Hi I'm new on here but I have a problem with my phantom 3 standard
When fly come up with "no image transmission signal"
It was only about 150 ft in the air and couldn't record anything does anyone know what can be wrong

Hi I have a dji phantom 3 standard
I've been having problems with this error when flying about 100ft in the air and 100ft in front of me.
It comes up "no image transmission signal "
And I lose the camera can't film or take a picture can you help me as this is very frustrating
My name is paul scarlett

Regards
Paul

NAZA M
Fabricio Caiaffa Rocha   09:38  



please help me .. I bought a dji controller. and I am not able to connect the computer to update ... I procedures
however does not recognize ...
You need some activation ??
follows the number of products shipped in the box ...
MC : S / N1001321683
LED : S / N 00R0265614
PMU : S / N 01A0461707

date code :
DC011122143235

SKU: 092268-6RA0 PCK

0422--8335--11903 S -E- 01-22
the light from the LED flashes flashing in orange

please you guys can help me .. I live in Brazil . rio de janeiro .. do not speak English. I am using the google translator. please help me to do my fly F450 drone
Thank you. Exellent week to all of DJI staff

Sincerely,
Fabricio Caiaffa

Which FPV googles would work best with a Phantom 4 and a Galaxy S5?

New member here.  My name is Chris and I'm from SE Idaho.  I had a few "practice" drones that I learned to fly with before actually picking up a Phantom 3 Professional a few weeks ago.  This is an absolutely amazing drone, although I wish it had a bit more speed.  But for what I'll be using it for, it's more than sufficient.  My carbon fiber props arrived today and they actually make it quite a bit more responsive than the stock blades, but I wouldn't say it adds a whole lot of speed overall.  (maybe a little)  I'm looking forward to taking my part 107 certification test at the end of the month so I can put my bird to work for me.  
Well, that's about it for now.  I look forward to interacting more and learning a lot more from all of the knowledgeable folks here.
Cheers!

Hello pilots: just to share the DJI GO has a dangerous blurry window when you are flying in "special areas", I felt like some one using my drone as spy machine or even worse as spy software.
What happened  was  a serous meter DJI GO has put me in adangerous critical situation. I turner on the drone and RC , I got full green whit GpS "safe to fly" then I have not any warning window just as normal, I took off  whit a very sunny blue day, when I was 25Meters above I got a suddenly unexpected blur window asking me to select any of two options what makes blind my screen, sunny day plus an reflections in a moment I was unable to control the drone,  I try to left "fly under my responsibility " , but the foolish software did not accept my "select"  I was pushed to select both ,mI was desperate to take back the drone control in addition I can say  if I did not select both options on such blur window  I was  not allow to move or return my drone, I got so scare and worry, I even thought to turn off the drone as emergency!!! I must say I always care who is around, or about cars trying to follow the rules for" safety fly" etc, I felt DJI controls my "hobby"  seems the foot steps shows in way fun, but actually could be DJI drones are spying the world.
I am worry if this CN technology.
Have fun pilot and be carful whit the "blurry window"
JAL

Does anyone have any ideas on why my shortened edited video won't save to my device from DJI GO? I'm also sure that I have enough space.

CAN DJI HELP ME
I was filming some professional surfers for about 15 minutes when I returned my P3P back for a fresh battery. I loaded a fresh battery in it and took off again and was in flight for less than 5 minutes, last reading on battery I saw was 89%, when the image froze on my Fat Shark goggles and my drone was no where to be seen. A surfer shouted out to me and said he just saw my drone fall like a brick into the ocean. It seemed like power was lost and it just stopped flying.
The issue I have is that I wasn't flying with my Ipad just my FS goggles and so I'm asking how do I get the flight log seeing I didnt have my Ipad hooked up to the controller, does the controller keep any data? and what would cause the drone to just stop flying.
Drone was bought new 4 months ago.

Eirlink Posted at 2014-9-18 10:39
hello everyone....enjoy the forum. ask plenty of questions

i've created a post but how do i post it

Hi to all. I have a question for you.

I have just bought the Phantom 3 Standard model which came with an 8 gb Sandisk Ultra micro SD card. This works fine but looking through the specs, realised it can take up to a 64gb card. I bought myself a Toshiba MicroSDXC UHS-I 64gb card but it is returning an invalid SD card error in the DJI app. I have tried it in two cameras of mine, one worked but the other gave the same error. I have tried to format it from within the app but of course it doesn't recognise it and so can't do it. I have formatted it in the camera which accepts it but it still gives the same error in the Phantom. DJI threads I have seen say only the original 8gb card works. Any ideas before I return this?

Thanks,

Laurence

Hello and testing here from a warm hearted Namibia Africa

When will the Phantom 5 be re least ?

I am a newbie and would like some thoughts on DJI insurance

I use Premiere Pro and Adobe Audition daily. A little bit of After Effects and maybe more in the future. I'm buying a new computer and want to use PP with zero hiccups. 4K editing, multiple codex, I don't want to use proxy editing, would like full resolution (not 1/4 etc while editing)! I prefer a laptop but it's not necc. JUST WANT TO EDIT smoothly, lots of audio tracks transitions etc. without an issue at all.

Also, are the m4000 quadro cards better at handling vide tha the new gtx 10 series?

I was leaning toward HP because I read their workstations use better parts etc. than consumer versions and that dreamcolor display is nice.

I plan on this being my main workstation for the next 4+ years, I usually buy with high specs (current computer is over 6 years old) so they will last.

4 options, tell me if they all will work flawlessly with your software, none etc. (2 laptops, 2 desktops)

laptop 1


ZBOOK17G3VER64143 with 32GB RAM = $4,545.75
HP IDS E3-1535M 17 G3 Base NB PC
Windows 10 Pro 64
NVIDIA Quadro M4000M Graphics
17.3 inch LED DreamColor3 UHD UWVA Anti-Glare enabled for Webcam (3840x2160)
32GB (4x8GB) 2133 ECC DDR4
1TB M2 PCIe NVMe Solid State Drive


2nd Option is the same machine with 64GB RAM
ZBOOK17G3VER64145 - $5,069.44
64GB (4x16GB) 2133 ECC DDR4


laptop 2


ADK 9710SL - customized 17.3" Laptop
Processor: Intel i7 6th gen 6700K Skylake 4GHz Quad 8 meg cache with HT [+$371.00]
RAM: 32 Gigs (2x 16gig) DDR4-2400 Sodimm [+$228.00]
Graphics Card: NVIDIA® GeForce™ GTX 1080 GPU with 8GB GDDR5X [+$613.00]
Video Monitors- LED/LCD: 17.3” 4K QFHD (3840x2160) Display with G-Sync Technology, Matted Finish [+$285.00]
Operating System: Microsoft Windows Professional 10 64 Bit OEM [+$158.00]
Hard Drive: Micron 512GB M600 SATA M.2 2280 Single Sided SSD [+$198.00]
Hard Drive: Micron 256GB M600 SATA M.2 2280 Single Sided SSD [+$116.00]
Hard Drive: Samsung - 850 Pro 1TB 2.5" Internal Solid State Drive [+$468.00]
Hard Drive: Samsung - 850 Pro 1TB 2.5" Internal Solid State Drive [+$468.00]

desktop 1

1 - Z840VER64115 - $5,016.00
(1) HP Z840 Workstation
(1) HP Single Unit Packaging
(1) HP Z840 1125W (1450W/200V) 90 Percent Efficient Chassis
(1) Win 10 Pro 64
(1) Operating System Load to SATA/SAS
(1) Intel Xeon E5-2620v4 2.1 2133 8C 1stCPU
(1) Intel Xeon E5-2620v4 2.1 2133 8C 2ndCPU
(1) 32GB DDR4-2400 (4x8GB) 2CPU RegRAM
(1) NVIDIA Quadro M4000 8GB 4xDP 1st No cable included Graphics
(1) 1TB SATA 1st SSD

desktop 2

ADK 3900 X99 Core I7 Custom System
Computer Case: Quiet Mid Tower Case - 2x5.25" bays, 8x 3.5" HDD trays - all compatible with SSDs, 2x2.5", 2xUSB 3.0,2xUSB 2.0 front ports [+$126.00]
RAM: 64 Gigs (4x16GB) 16 GB DDR4 3000 [+$464.00]
Power Supply: 1000 Watts Total Modular 80 Plus Gold Quiet Power Supply - 7 Yr Warranty [+$206.00]
Motherboard: ADK Core i7 HW-E X99 Rev 2 - Xeon E5v4 support, Up to 128Gig ram,5x PCIe16x,1-PCIe8x,1x- PCIe1x,8x Sata 6Gb/s, M.2/U.2, TB3 Card, 4x USB3.1, 8x USB3.0
Processor: Intel Core i7 Corei7-6900K 3.2GHz (Turbo to 3.7GHz) 8 core 20meg cache [+$1,077.00]
CPU Heatsink/Cooling: ADK Quiet and Cool CPU and Case cooling solution
Operating System: Microsoft Windows Professional 10 64 Bit OEM [+$158.00]
System Backup and Recovery: Paragon Backup & Recovery 15 Suite with ADK recovery Flash Drive
Hard Drive: Samsung - 850 Pro 512 GB 2.5" Internal Solid State Drive [+$254.00]
Hard Drive: Samsung - 850 Pro 1TB 2.5" Internal Solid State Drive [+$468.00]
Hard Drive: Samsung - 850 Pro 1TB 2.5" Internal Solid State Drive [+$468.00]
Hard Drive: Samsung 950 PRO 256 GB M.2 SSD: 2.15 GB/s Maximum Read Transfer Rate - 900 MB/s Maximum Write Transfer Rate - M.2 2280 [+$206.00]
Card Reader: USB 3.0 Flash Card Reader/Writer [+$52.00]
DVD-R/W or Blu-Ray Drive Options: 24X DVD-RW Dual Layer [+$38.00]
Graphics Card: GeForce GTX 1080 8GB ROG STRIX - 2560 Cuda Cores [+$675.00]
Thunderbolt 3.0 Options: Intel® Thunderbolt™ 3 included
Warranty: ADK 2 year parts and labor, onsite pickup, Lifetime tech support. [+$65.00]

thoughts? CAN'T THANK YOU ENOUGH for your time!

I am planning to purchase a Phantom. Is there a comparison chart anywhere detailing the differences?
Thank you
Danny

Cheers from Greece,hey guys I am uploading a video in a new thread and It is not visible in the forum.Am I doing anything wrong???

Hi my name is Alan and i am from Boston mass.just got me a DJI phantom 3 advanced.And i love it Ty DJI for a wonderful product.

Will DJI be doing some kind of deal for those who have bought the Osmo recently to upgrade to the + version? I bought the Osmo about a month ago and would have bought the + model no question as I do drama and the contant wide angle is v limited in use. I'm now worried I will have to sell my Osmo in order to buy the + model - this would be  the second time as I bought it before the fan noise was fixed during recording and sold it pretty instantly as couldn't get a refund, obviously don't want to lose another bunch of money.

Hello I'm Chris, new to this so not much to ask right now.I have the P3S. I've only had it up a couple of times. Seems like a good starter. Lots to learn. Chris