Hi,  One of the plastic tabs has broken on the propeller mount on my Phantom 4 Pro.  Looking at the parts page there is a mount that clearly states it is not for the Pro version while the part linked here sounds like it may not include the plastic "latching tab" piece needed?

http://store.dji.com/product/pha ... g-plate#/?_k=6mii3m

Please note I realize the pic shows needed part, but description may  indicate otherwise.

Presumably that includes 2 mounting plates, 2 sets of screws and 2 springs?
(1 set clockwise and 1 set counter clockwise)

The springs are shown in the 3rd photo but not in the package contents list...

I have orderd the Phantom 4 installation kits before.  
It includes 2 complete repair sets for 2 propellor connector hubs.  The plastic pieces, the metal spring tabs and the screws.
Note:  if you want to change out all 4 propellor connector hubs (probably a very good idea) you'll need 2 sets.
The ones in the picture you're showing are for the Pro model only........and it looks like they are a all in one hub system vs the older P4 spring system  model.  I would bet they include the screw with the hubs.
Good luck!

The P4 prop latch is different. I would give them a phone call to retrieve another latch to get the right part. You don't need your P4P dropping like a rock.

Tmygun Posted at 2017-5-13 02:55
I have orderd the Phantom 4 installation kits before.  
It includes 2 complete repair sets for 2 propellor connector hubs.  The plastic pieces, the metal spring tabs and the screws.
Note:  if you want to change out all 4 propellor connector hubs (probably a very good idea) you'll need 2 sets.

"The ones in the picture you're showing are for the Pro model only........"
Does that mean that they will not fit on a P4 standard?

I have ordered this kit and it contains two complete assemblies ready to go for P4 or P4P.