Hi guys,

I have a Dji Phantom vision 2 V3.0 CE
With a Fc200 camera and have the black screen isue.
I can make pictures and videos but no live view.

Is there already a fix for it.

i hope so.

Who can help me out.


Ramon.
Thank you

It's a Phantom 2 Vision then, right?  Can you give us some history?  Was it connected before?  

Mark The Droner Posted at 2017-5-13 14:52
It's a Phantom 2 Vision then, right?  Can you give us some history?  Was it connected before?

How do you mean was it connected before i have all new updates the program says that.

Have you ever flown with this before?  If so, did it work correctly?  

Mark The Droner Posted at 2017-5-13 15:16
Have you ever flown with this before?  If so, did it work correctly?

i bought it from another guy and i have the problem

I would read the manual and go through the procedure for initially preparing for flight so you know you're doing everything correctly.  

http://dl.djicdn.com/downloads/p ... _Manual_v1.8_en.pdf

If the screen is still black, you will likely have to rebind the camera to the extender.  

Ramonn92 Posted at 2017-5-13 15:20
i bought it from another guy and i have the problem

Did the guy who sold it to you demonstrate it working before you did the update? A few years ago, DJI and GoPro had a falling out and GoPro modified their software to stop live view with DJI. This may have happened to this drone too. Hence why I don't update software, 90% of the time the drone or camera does not work afterwards.

I had a black fpv screen issue with my P2 a month or two back and found a solution on the net.  Can't remember where, I'm afraid.  Take out the micro-SD card from the camera, stick it in another computer (in my case an Android tablet) and reformat it.  Put it back in the camera.  Worked for me and is still working.  Good luck!

Had same problem after long storage. Did a nand reflash now working fine again. Look for DJI nand repair