dougramstad
New
United States
Offline
|
You need to go through the procedure again and submit your new flight controller SN. After you receive your approved results for Individual Unlocking Application, then Install the latest DJI GO app and click "General Setting" to get the "Unlock“ option. Then click " synchronize unlock information" and enable the unlocking. 1. Upgrade the drone and controller's firmware to the latest one. (Note: Please contact flysafe@dji.com for the firmwares if you use Phantom 3 Standard. IMPORTANT: For Mavic Pro, please do not upgrade its firmware to V01.03.0500, Phantom4 Pro not to 01.03.0417 and Inspire2 not to 01.00.0240. Because these firmware do not support unlock Restricted Zones and need to wait for next firmware.); 2. Use the latest DJI Go App.(Note: DJI Go 3 Android does not support the unlock function.) 3. When you unlock an area for the first time, make sure the mobile device has Internet connection. 4. Connect to the drone. Use the email account for applying the unlock license to login DJI Go, enter DJI GO App-Camera-General Setting-Unlock, click " synchronize unlock information" to obtain the unlock licenses and enable the unlocking by sliding the corresponding switch. 5. A green zone will appear for the unlocked area where you can fly the drone. You can not fly the drone out of the green zone. 6. After enabling the unlocking, you will only be able to fly in the unlocked areas. You can disable the unlocking by sliding the switch. 7. If you are using DJI Go iOS App, you need to be in the unlocked areas for enabling the unlocking. If you are using DJI Go 4 App for Phantom 4, Phantom 4 Pro, Mavic Pro, Inspire 2, you do not need to be in the unlocked areas for enabling the unlocking. 8. Make sure the mobile device has Internet connection. |
|