Please select Into the mobile phone version | Continue to access the computer ver.
Gimbal has gone Limp
591 2 2017-6-10
Uploading and Loding Picture ...(0/1)
o(^-^)o
fans42215639
lvl.1
Ireland
Offline

Tonight I took out my Osmo +. first time in 3 weeks, and gave it a check over. I turned it on and it was working fine, connected to the phone perfectly. So I was just doing an automatic calibration on it and when it was completed the Osmo started beeping and the gimbal had gone limp.
It has not worked since. Has anyone any advice on this?

John
2017-6-10
Use props
fanse4cb4c94
lvl.3
South Africa
Offline

Yes . If you search back to my post around the 22nd of May you will see a video of the exact same result on mine , this occurred after the latest firmware update. It doesn't do it on the previous version. There was no resolution from DJI to the fault , so hopefully it will be sorted in the next update. It has'nt effected the gimbal performance on mine while shooting, but it is disconcerting.
2017-6-11
Use props
fanse4cb4c94
lvl.3
South Africa
Offline

https://youtu.be/sYthLfGv6gM
2017-6-11
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules