Please select Into the mobile phone version | Continue to access the computer ver.
wifi signal
1287 16 2017-6-19
Uploading and Loding Picture ...(0/1)
o(^-^)o
WIMO
lvl.3
Netherlands
Offline

ik have bought a skyreat parabolic, it works really good. I get now 763 m with full remote signal bars (i haven't got further yet), but my wifi signal give my much less signal. Is there any way to give the p3s more wifi signal?
2017-6-19
Use props
solentlife
Captain
Flight distance : 1087530 ft
Latvia
Offline

Yes .....

You have two choices if you stay with stock internal antenna :

1. Icarus - which is designed to be Android and sits on your android ready to be used when you want. It will increase your WIFI 2.4Ghz signal to 27Dbi or to 30Dbi if you wish .... 27Dbi is the normal boost. Cost is about $5 of the Google Play store .... I use this and excellent. You can always revert to factory if you want.
Once you change power - you can use Ipad / Iphone or Android ... power level will stay what you set.

2. Magic Power - a free application  but needs you to use a PC hooked up ... again it changes power to 27Dbi ...
Once you change power - you can use Ipad / Iphone or Android ... power level will stay what you set.

OK ?

Nigel
2017-6-19
Use props
WIMO
lvl.3
Netherlands
Offline

solentlife Posted at 2017-6-19 10:05
Yes .....

You have two choices if you stay with stock internal antenna :

could you explain to me how I need to use Icarus, please
2017-6-22
Use props
solentlife
Captain
Flight distance : 1087530 ft
Latvia
Offline

Honest .... ICARUS has full good instructions when you install to the Android. Just follow the steps 1 2 3 and so on.

I suggest that you accept TELNET when using ...

Nigel
2017-6-22
Use props
WIMO
lvl.3
Netherlands
Offline

solentlife Posted at 2017-6-22 04:50
Honest .... ICARUS has full good instructions when you install to the Android. Just follow the steps 1 2 3 and so on.

I suggest that you accept TELNET when using ...

thank you every much
2017-6-22
Use props
WIMO
lvl.3
Netherlands
Offline

solentlife Posted at 2017-6-22 04:50
Honest .... ICARUS has full good instructions when you install to the Android. Just follow the steps 1 2 3 and so on.

I suggest that you accept TELNET when using ...

two more questions. 1: I am in the Netherlands, does it also works there.
2: sorry if you already said this, but is the change uploaded to the controller or drone and will it still  boost
after using icarus and using another device.
2017-6-22
Use props
WIMO
lvl.3
Netherlands
Offline

solentlife Posted at 2017-6-22 04:50
Honest .... ICARUS has full good instructions when you install to the Android. Just follow the steps 1 2 3 and so on.

I suggest that you accept TELNET when using ...

I'm only a child , what is TELNET and how do i accept it
2017-6-22
Use props
solentlife
Captain
Flight distance : 1087530 ft
Latvia
Offline

Install Icarus to Android device.

It will give you choice of with or without TELNET. I advise to select TELNET when activating to the P3.

You can choose the power levels for each RC and AC ... I suggest 27 for both.

The changes are permanent until you decide to run ICARUS again and alter the power / revert to factory.

Where you are makes no difference ... Netherlands, USA, UK, etc.

Once the Android has done the job ... you can use any display you want ... Ipad or Android.  Just keep in mind that the Android is the operator to adjust Icarus.

Nigel
2017-6-22
Use props
WIMO
lvl.3
Netherlands
Offline

solentlife Posted at 2017-6-22 08:33
Install Icarus to Android device.

It will give you choice of with or without TELNET. I advise to select TELNET when activating to the P3.

thank you very much
2017-6-22
Use props
WIMO
lvl.3
Netherlands
Offline

solentlife Posted at 2017-6-22 08:33
Install Icarus to Android device.

It will give you choice of with or without TELNET. I advise to select TELNET when activating to the P3.

I have installed it, what mean TX powerlimit, and what do you prefer to set that on
2017-6-28
Use props
solentlife
Captain
Flight distance : 1087530 ft
Latvia
Offline

I set all to fixed 27 .. with TELNET ...

NIgel
2017-6-28
Use props
WIMO
lvl.3
Netherlands
Offline

solentlife Posted at 2017-6-28 09:12
I set all to fixed 27 .. with TELNET ...

NIgel

thanks a lot for all the information, I now can fly 700 m without any latency ( i haven't got further yet with the mod). soon I will go further and I already can reach 1050 m with parabolic only.
2017-6-29
Use props
fansd3275776
lvl.1
Flight distance : 664373 ft
Serbia
Offline

Moj P3S je imao najdalju distancu sa fabrickom antenom i fimware 1.8 1400m ali na otvorenoj povrsini bez ometanja signala i naseljenom mestu ne moze vise od 600m da ide
2017-6-30
Use props
WIMO
lvl.3
Netherlands
Offline

fansd3275776 Posted at 2017-6-30 02:56
Moj P3S je imao najdalju distancu sa fabrickom antenom i fimware 1.8 1400m ali na otvorenoj povrsini bez ometanja signala i naseljenom mestu ne moze vise od 600m da ide

i only can awsner it in englisch
2017-6-30
Use props
WD9EON
Captain
Flight distance : 686886 ft
United States
Offline

WIMO Posted at 2017-6-30 03:14
i only can awsner it in englisch

I use Google translate when I run across post in different languages.
Here is what it says in English.
13 #
My P3S had the longest distance with the factory antenna and fimware 1.8 1400m but on the open surface without disturbing the signal and the populated place can not exceed 600m to go

Not trying to hijack the post, looks like the OP is just making a statement.
2017-6-30
Use props
WIMO
lvl.3
Netherlands
Offline

solentlife Posted at 2017-6-28 09:12
I set all to fixed 27 .. with TELNET ...

NIgel

where can I change the tx power to fixed?
2017-6-30
Use props
WIMO
lvl.3
Netherlands
Offline

solentlife Posted at 2017-6-28 09:12
I set all to fixed 27 .. with TELNET ...

NIgel

Ive now fly limit only, how can I set it to fixed and what difference does that make
2017-7-3
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules