After update to 602: YAW issues and CSC crash
Home / Service / Inquiry
612 10 2017-8-21
Uploading and Loding Picture ...(0/1)
o(^-^)o
rolsch_p4p
lvl.2
Flight distance : 46834 ft
+ Add Friend Person Message
Germany
Offline

Tip: The post by the administrator or moderators shield
2017-8-21
Use props
rolsch_p4p
lvl.2
Flight distance : 46834 ft
+ Add Friend Person Message
Germany
Offline

  2#
http://forum.dji.com/forum.php?m ... mp;page=1#pid887655
2017-8-21
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
+ Add Friend Person Message
Offline

  3#
Rolsch, we are sorry to hear about the accident, I have reported your concern to local team to apply data analysis, please wait patiently for the result. Please keep me updated if you need further assistance. Thanks.
2017-8-21
Use props
rolsch_p4p
lvl.2
Flight distance : 46834 ft
+ Add Friend Person Message
Germany
Offline

  4#
Hi Mindy,
i have mail from invoice.europe@dji.com:

Fly052       Date:09/08/2017(utc)
1.The aircraft was controlled by pilot in GPS-POI mode.
2.The yaw couldn't be controlled during the POI mode.
Conclution: FC logic error.Warranty.

But i dont understand "FC logic error".
- is this an bug in the *.*.602 P4P-Firmware?

Thanks for the assistance...

Rergards
Roland
2017-8-24
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
+ Add Friend Person Message
Offline

  5#
rolsch_p4p Posted at 2017-8-24 23:40
Hi Mindy,
i have mail from :

You are welcome, the drone has been shipped out, hope you will receive it shortly.
2017-8-25
Use props
rolsch_p4p
lvl.2
Flight distance : 46834 ft
+ Add Friend Person Message
Germany
Offline

  6#
The p4p ist here...but... the gimbal makes a beeeeeeep noise and the gimbal calibration dont works.
- hey DJI, i have an repair recept in my hands and read "Quality Assessed" = "Pass"  ?!!!? :-o

When i starts th calib. proccess it hangs by 6 or 10 %.
Then i touch the gimbal slightly and the proccess rund to 50% and not more.

Firmware: 01.04.0602

I read a beta Firmware should solve this problem?

Regards an not funny...
Roland
2017-8-28
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
+ Add Friend Person Message
Offline

  7#
rolsch_p4p Posted at 2017-8-28 11:12
The p4p ist here...but... the gimbal makes a beeeeeeep noise and the gimbal calibration dont works.
- hey DJI, i have an repair recept in my hands and read "Quality Assessed" = "Pass"  ?!!!? :-o

Please PM me your DJI account, we will try our best to help you out, thanks.
2017-8-28
Use props
rolsch_p4p
lvl.2
Flight distance : 46834 ft
+ Add Friend Person Message
Germany
Offline

  8#
DJI Mindy Posted at 2017-8-28 20:00
Please PM me your DJI account, we will try our best to help you out, thanks.

Ok, now you have my account.
2017-8-28
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
+ Add Friend Person Message
Offline

  9#
rolsch_p4p Posted at 2017-8-28 22:46
Ok, now you have my account.

Thanks, PM has been replied, sorry for all the inconvenience caused.
2017-8-29
Use props
rolsch_p4p
lvl.2
Flight distance : 46834 ft
+ Add Friend Person Message
Germany
Offline

  10#
DJI Mindy Posted at 2017-8-29 01:51
Thanks, PM has been replied, sorry for all the inconvenience caused.

Hi Mindy,
upgraded to 01.04.608 and now works the gimbal calibration, no beeep nois.

Now i notice a small yaw drift in the gimbal but i re-check this again after IMU and compass calibation.

Regards
Roland
2017-8-29
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
+ Add Friend Person Message
Offline

  11#
rolsch_p4p Posted at 2017-8-29 23:16
Hi Mindy,
upgraded to 01.04.608 and now works the gimbal calibration, no beeep nois.

OK, please keep us updated if there are any further questions.
2017-8-30
Use props
Advanced
Bold Text Color
Upload
Picture Add Link Emoticon
You need to log in before you can reply Login | Register now

Credit Rules