my spark seems to be stuck on 1.00.0500 - with DJI Assistant, it says 0500 is current, with the DJI Pro 4 app, it says i have no updates.
that seems wrong, since 1.00.0600 was the mandatory update - right? why is my spark stuck on 0500?

Ha! Should be ok it Dji Go 4 does not stop you from taking off. Try logout then relogin again to Assistant connecting to the internet.
By the way, today(2nd Sept. GMT+7) I flew my Spark offline with Dji Go 4 4.1.3) with out problem with .0500 firmware.

I have the same Problem. The iOS App as well as DJ Assistant (WIN) say that I am on the current firmeware 01.00.0500. No change to upgrade to 01.00.0600. Please help!

Did you download the latest DJI Assistant 2 in Spark interface? I would recommend you to update via DJI GO to check whether it is available.

Samme issue here. Both DJI Go and DJI Assistant shows V 01.00.0500 as current firmware. The V 01.00.0600 is not visible at all.

I tried it with the DJI Assitant App for Windows:



Refreshing doesn't help.

I also tried the iOS DJI Go 4 App. It says that 01.00.0500 is the current version. No update available.

If I disconnect the Spark, reinstall the App, re-login I see the Update to 01.00.0600 and I'm able to download it. But if I then connect the Spark it stops at 0% with the error Massage "Update failed".

If I try it again with the Spark connected I again get the massage that 01.00.0500 is the current version. No update available.

I get the impression that the App knows that there is a 01.00.0600 and also downloads it, but the Spark after checking the current system (and serialnumber?) says: No, I'm fine with 01.00.0500, no compatible update available.

Is there a Serialnumber check? Why does it fail? Are there different regional versions for the firmeware 01.00.0600?

I fixed it now. I had to go outside so that the SPARK has a GPS Signal in order for the Update to appear and succeed. Strange that a firmware upgrade requires GPS. But it worked.

spark-flying Posted at 2017-9-3 01:55
I fixed it now. I had to go outside so that the SPARK has a GPS Signal in order for the Update to appear and succeed. Strange that a firmware upgrade requires GPS. But it worked.

Thank you for your update, glad to hear that you've got it resolved, hope you can enjoy the drone, happy flying!

DJI Susan Posted at 2017-9-1 22:47
Did you download the latest DJI Assistant 2 in Spark interface? I would recommend you to update via DJI GO to check whether it is available.

Hi All,

I'm trying to update my spark firmware to .0600 but unfortunately every time it fails! Tried uninstalling and reinstalling the app ( DJI GO 4.1.12 ) but still no use!!

By the way, I have flown it for more than a month.

Could anyone please help?

fansb80fe5b8 Posted at 2017-9-29 12:26
Hi All,

I'm trying to update my spark firmware to .0600 but unfortunately every time it fails! Tried uninstalling and reinstalling the app ( DJI GO 4.1.12 ) but still no use!!

Thanks for getting back to us. Please download the DJI GO from here and try again.
https://www.dropbox.com/s/lxe17y ... 1.5.3_guan.apk?dl=0

Alternatively, you can also download the latest DJI Assistant 2 of Spark. Please keep us posted whether it helps.