So i have had my Phantom 2 and logged about a few hours and gotten the hang of all  functions and have recently upgraded to the Zenmuse H3-3d Gimbal for my Sj4000 cam.  I would like to upgrade  to a FPV and utilize a Tablet / Cellphone to View whats the camera sees.  
So i have recently looked at a bunch of brands of FPV setups for the Phantom and Zenmuse. Blackmagic, ImmersionRC, Boscam, Fatshark for googles etc.  I dont mind using a monitor if i cant use my Tablet or Phone.  
So im curious about realworld usability. How easy the UI  and install is. Obviously value is a mild factor.  but mor eor less reliability is the most important.

If you have pics of your setups please post and mention what the pros and cons are.

Please look at this FPV HUB kit instruction guide to understand how to get video to an external monitor or goggle system with your Phantom:

http://download.dji-innovations. ... ruction_v1.0_en.pdf

DJI Equipment you would need:

- AVL 58 Video transmitter/receiver
- FPV HUB
- (optional) iOSDmini for on screen display of flight data

Here is a list of dealers that should have stock of this equipment and much more:

http://www.dji.com/product/phantom-2/dealer

If you would like to use your camera with a mobile device, you can purchase the DJI Lightbridge. More information can be found here:

http://www.dji.com/product/dji-lightbridge

Hey, do u mind showing me some of ur videos with SJ4000? i have a so called sj6000 and the quality is pretty unacceptable

I don't claim to be a good movie maker

Nbx33 Posted at 2015-4-7 05:29
https://www.youtube.com/watch?v=2PZLp2p8L8A

https://www.youtube.com/watch?v=N9GG30TG_e8

Just curious, you flew to 1400 feet just because the factory had preset that limit?  In Mount Airy, MD, USA?

nrgwise Posted at 2015-4-7 05:39
Just curious, you flew to 1400 feet just because the factory had preset that limit?  In Mount Airy ...

Seems a little (around 1,000 feet) outside the factory setting to me too.

Nbx33 Posted at 2015-4-7 05:29
https://www.youtube.com/watch?v=2PZLp2p8L8A

https://www.youtube.com/watch?v=N9GG30TG_e8

Now that I have seen the videos I have a question for the GoPro set up people (I am a Vision+ user).  The videos above show every little movement of the bird.  It was as if it has now "gimbal effect.  More like the camera is screwed to the phantom.  Is this correct?

So with the AVL 58, IOSD, and hub this  will allow me to View on which type on viewing setup?
ANy 5.8ghz Monitor?

My factory height before re write  was set to 1380 feet.  That what it stated when calibrated. I could re write but  no need to do that yet for me

No gimbal in those video by the way it is  sticky mounted.

I thought I mentioned it in the comment of the video.  
yes NO GIMBAL...
Sjcam sj4000

You aren't suppose to fly above 400 feet from takeoff altitude.  You probably, in good faith, should go and set it to 400 ft.

I just installed the immersion RC 600mw transmitter w/mini IOsd. Got the 7 channel Black Pearl lcd screen, spironet antennas and patch antenna. Everything is working great. Have not tried it at great distances yet but has performed very well at 1/4 mile. They suggest using the 7 channel Black Pearl monitor with the immersion RC tx because the frequencies are more closely aligned than the 32 channel. I ordered my equipment from DPC. They are great people to work with and won't sell you something that's not compatible with what you are trying to do. I did have to open the shell on the bird to put in a supplied wire harness that came with the kit but I mounted everything on the bottom of the battery bay with heat resistant mounting tape.
http://www.dpcav.com/xcart/Black ... tom2-iOSD-Mini.html

Nbx33 Posted at 2015-4-7 06:18
No gimbal in those video by the way it is  sticky mounted.

I thought I mentioned it in the comment  ...

Wait what?  In your original post I thought you said you had "the Zenmuse H3-3d Gimbal for my Sj4000 cam".  No?

And you say the stock, preset alt was 1,400 feet?  Sorry but I think it may not a real posting.  

Good luck to you sir.

go4two Posted at 2015-4-7 07:03
You aren't suppose to fly above 400 feet from takeoff altitude.  You probably, in good faith, should ...

Why?   my phantom isn't meant for testing height limit flying in clouds  like some other do. I am not breaking any laws and im not within any No fly zones  Nor am I crashing into government buildings.  There is no need to reset my Phantom to 400 ft.

acenothing Posted at 2015-4-7 07:31
Wait what?  In your original post I thought you said you had "the Zenmuse H3-3d Gimbal for my Sj40 ...

I have the gimbal NOW  those video aren't now there weeks old.. I haven't posted a video with gimbal yet.  Not misleading anyone.    isn't it possible to post an old video.  Just saying..  
how about we get back to the question

yes out of the box the altitude limits were set to 1380 after the updated firmware.   Why is this  shocking..!?

Nbx33 Posted at 2015-4-8 09:24
yes out of the box the altitude limits were set to 1380 after the updated firmware.   Why is this  s ...

Only because the guidelines/limits in the US are max altitude of 400 ft. for RC aircraft as previously posted and you seem to feel comfortable ignoring.  Ignoring, I might add, at the expense of the rest of us who follow those guidelines.

Well I am somewhat comfortable flying above 400ft    not being ignorant  ..your opinion is welcome. and ill continue to fly my normal flights  Typical flights never exceed ill say an estimated 400 ft. as seen in my other videos.  

Raybro   so you never have static issues or lines on your screen..