Please select Into the mobile phone version | Continue to access the computer ver.
Phantom 3 Pro Remote Issue
75 7 2017-9-13 17:19:55
fans708d003c
lvl.1
Flight distance : 24832
Canada
Offline

Hello, was recalibrating remote today on my Phantom 3 pro and noticed the right stick binding slightly.  After further inspection, I noticed the black area surrounding the stick was slightly pressed in below the surrounding shell. Pulling the stick brings this area out with a slight clickbut with little pressure on the stick it falls in again.  I'd hate for it to bind while flying. Has anyone had this issue before?  Not many flights on this machine, disappointed.
2017-9-13 17:19:55
Use props
ALABAMA
Second Officer
Flight distance : 279903
United States
Offline

Never heard of that happening.  Sounds like a defect.
2017-9-13 17:49:12
Use props
Tmygun
Second Officer
Flight distance : 799961
  • >>>
United States
Offline

I'm with Alabama.......sounds like a manufacturing defect.  Contact DJI and I'm sure they will make it right...and I'm assuming from what you said it's still under warranty.
2017-9-13 17:54:59
Use props
DJI Thor
Administrator
Japan
Offline

Had you reported this case to the support team? Could you please provide a short video for this case to support.us@dji.com for a further help. Thank you.
2017-9-13 20:24:57
Use props
fans708d003c
lvl.1
Flight distance : 24832
Canada
Offline

Thank you all, will send a short video to that email.
4 days ago
Use props
fans708d003c
lvl.1
Flight distance : 24832
Canada
Offline

Sent a video to the email but it won't upload here.  Here is two pics. Look at gap between black and white areas.  
IMG_1747.JPG
IMG_1747.JPG
4 days ago
Use props
fans708d003c
lvl.1
Flight distance : 24832
Canada
Offline

Sorry, posted same pic.  
IMG_1748.JPG
4 days ago
Use props
RicardoGray
First Officer
Flight distance : 1109086
United States
Offline

If it is out of warranty, I would take it apart to investigate what is going on. It only takes a few minutes to remove a couple screws and pop the two halves apart. It may be something broken inside that you can repair with some epoxy or choose to replace if necessary. Or it could be a screw loose ? It is not hard to take apart.
4 days ago
Use props
You need to log in before you can reply Login | Register now

Credit Rules

Close

DJI RecommendsPrevious /1 Next