Has anyone had the black plastic surrounding the stick fall into the remote, almost like there is a broken clip or something?  I recalibrated my remote today and the right stick was binding.  When I looked I noticed the black plastic. Area somewhat "recessed".  I pulled slightly on the stick and it clicked back into place.  However, a slight depression on the stick and it collapses again. Any suggestions?

Could you happen to post pictures or short video here that we will help to see if there is any hardware malfunction, thank you for your time.

8 sec video would not upload so here are two pics.  Look closely at the black ring around the stick next to the white shell of the remote.

fans708d003c Posted at 2017-9-18 04:36
8 sec video would not upload so here are two pics.  Look closely at the black ring around the stick next to the white shell of the remote.

Sorry that the picture isn't clear enough to show the problem, please upload the video to Dropbox or Google Driver and then post the link here, thank you.