Rodher12
lvl.1
Mexico
Offline
|
Floating Posted at 2017-9-20 13:35
The VCOM and Vision drivers are all that are needed. I did needed to install VCOM driver with Windows in troubleshooting mode and allowing unsigned drivers. Then updating the COM device driver in the Ports section of device manager. Check to see if the Vision driver is also loaded in the libusb-WIN32 device section. Then make sure you start DJI Assistant 2 started with the Drone NOTconnected. After Assistant is fully started, connect the powered up drone to the PC. Assistant will finally get around to seeing your device.
I know that has been past a few years but now I'm becoming crazy with this issue. My spark suddenly stopped connecting with anything.. controller, mobile device, pc (it does the sound when you connect a device to your pc)... I already made it to show in "device manager" in ports (COM & LPT) as "dji usb virtual com (COM4) but I couldn't understand how to do what you do in the "troubleshooting mode" and how to update VCOM?
I hope you can read this message and tell me what to do.
Rod |
-
|