Please select Into the mobile phone version | Continue to access the computer ver.
matrice 100 entered into FAILSAFE mode and got stuck
928 3 2017-9-21
Uploading and Loding Picture ...(0/1)
o(^-^)o
pkp
lvl.1

United States
Offline

Hi All, My matrice 100 is stuck in FAILSAFE mode, after it crashed the other day. It was a brutal crash: the arm M-3 got broken.

I replaced the arm now. However, after replacement, I still observe a *beep* sound form the arm. Motor Test on this arm is NOT working. I can not calibrate anything here.(Please see my other post here: https://forum.dji.com/forum.php? ... mp;page=1#pid964264)

As an observation:
I see that the RC status on the flight controller is: FAILSAFE. I suspect this is somehow related to the crash. I want to know if there is a way to get OUT of this mode on the flight controller.

PS: I need not turn on my RC for: listening the beep sound (or) seeing this FAISAFE mode.

Any help would be really appreciated. Thank you very much.

2017-9-21
Use props
Mark Guille
Captain
Flight distance : 2031818 ft
Jersey
Offline

Send it back dude, it is obviously not safe to fly like this. It is your legal responsibility to ensure the aircraft is safe to fly, if there is an accident, you will be liable, not worth it.
2017-9-21
Use props
DJI Susan
Administrator
Online

I'm sorry to hear the accident. Please contact the support and send it in for fully diagnosis: http://www.dji.com/support.
2017-9-22
Use props
pkp
lvl.1

United States
Offline

Mark Guille Posted at 2017-9-21 15:30
Send it back dude, it is obviously not safe to fly like this. It is your legal responsibility to ensure the aircraft is safe to fly, if there is an accident, you will be liable, not worth it.

looks like the only option I got!!
2017-9-22
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules