Hi...
Yesterday I Was Flying my Phantom 4 Pro + and It Display gaves the error Gimbal Motor Overloded and its gimbal got vibrate and jerk automatic..
When Phantom 4 start it doesn't vibrate but when it take off it gives error of gimbal motor overloded ,
I Buy phantom 4 recently , so How I Do ??

Have you taken the bracket off of the gimbal? What version of firmware are you using?

Yes , Defenetely I Remove The Bracket ..
And I Not Update Remote Control And Phantom 4 Pro Aircraft Because I Bought Aircraft About 20 Days ..

Firmware Version Is Default From DJI

R_Bhavy Posted at 2017-9-24 00:40
Firmware Version Is Default From DJI

If you are still getting this message, try a visual inspection on the gimbal to see if there is any visible damage such as a ribbon cable broke.  If you are still having this problem, you may want to have a technician look at your product for evaluation.

DJI-Mark Posted at 2017-10-2 08:30
If you are still getting this message, try a visual inspection on the gimbal to see if there is any visible damage such as a ribbon cable broke.  If you are still having this problem, you may want to have a technician look at your product for evaluation.

No Any Physical Damage On My Aircraft