Please select Into the mobile phone version | Continue to access the computer ver.
camera Gimble Calibration
972 18 2017-10-17
Uploading and Loding Picture ...(0/1)
o(^-^)o
fans39060e83
lvl.1
Flight distance : 792533 ft
Kuwait
Offline

Hi
15 days pass i brought Phanthom 4 pro camera gimble calibration is stuck on 50% what could be the problem new firmware upadted need help.
2017-10-17
Use props
DJI Elektra
DJI team
Hong Kong
Offline

Please provide your DJI account and we will provide a beta firmware for you and you can try it again.Thanks for your support.
2017-10-18
Use props
Cetacean
Captain
Flight distance : 2528264 ft
  • >>>
United States
Offline

Aloha fans39,

     Be sure your P4 Pro is on a flat surface before you start calibration.  Use a carpenter's level to be sure the surface your Phantom is on is level.  If it still gets stuck at 50%, go into the General Settings and select the gimbal.  In there is a manual leveling option.  Level the camera and exit the General Settings.  Then go to the option for Automatic Gimbal calibration and try again.

     The final method is to calibrate the IMU before you calibrate the gimbal.  Again it will be very important that you use a carpenter's level to be sure the surface you are using is properly level.  After calibrating the IMU, try to autocalibrate the gimbal again.

     Hope this helps!  Let us know how it goes.  There is also a tutorial video on calibrations in the P4 Pro web page at the DJI.com web site.

Aloha and Drone On!
2017-10-18
Use props
fans39060e83
lvl.1
Flight distance : 792533 ft
Kuwait
Offline

Cetacean Posted at 2017-10-18 00:07
Aloha fans39,

     Be sure your P4 Pro is on a flat surface before you start calibration.  Use a carpenter's level to be sure the surface your Phantom is on is level.  If it still gets stuck at 50%, go into the General Settings and select the gimbal.  In there is a manual leveling option.  Level the camera and exit the General Settings.  Then go to the option for Automatic Gimbal calibration and try again.

As your steps done No success still 50%
2017-10-18
Use props
fans39060e83
lvl.1
Flight distance : 792533 ft
Kuwait
Offline

no success still stuck 50 %
2017-10-18
Use props
fans39060e83
lvl.1
Flight distance : 792533 ft
Kuwait
Offline

artstudiogoa@gmail.com
2017-10-18
Use props
DJI Elektra
DJI team
Hong Kong
Offline


Thanks for your update. Please wait patiently.
2017-10-18
Use props
Cetacean
Captain
Flight distance : 2528264 ft
  • >>>
United States
Offline

fans39060e83 Posted at 2017-10-18 00:30
As your steps done No success still 50%

Aloha fans39,

     Good luck with the help Electra will provide.  They do their best to help their customers get the most out of their products.

Aloha and Drone On!
2017-10-18
Use props
Fastdrone
lvl.1
Flight distance : 41896 ft
Brazil
Offline

DJI Elektra Posted at 2017-10-18 00:00
Please provide your DJI account and we will provide a beta firmware for you and you can try it again.Thanks for your support.

Good Afternoon Thor.

I am also having the same problem. Loud Noise when turn on the P4P, video trembling and Gimbal calibration freeze at 50%.  Can you please send me the beta as well?

dji.fastdrone@gmail.com


Thank you so much
2017-10-18
Use props
BagoDJIoperator
Captain
Flight distance : 1077608 ft
United States
Offline

Hmmm. Interesting I never had that problem..... I always calibrate my gimbal before evryflight and no issues. Hmmm.
2017-10-18
Use props
DJI Elektra
DJI team
Hong Kong
Offline

Fastdrone Posted at 2017-10-18 08:34
Good Afternoon Thor.

I am also having the same problem. Loud Noise when turn on the P4P, video trembling and Gimbal calibration freeze at 50%.  Can you please send me the beta as well?

Thanks for your update. Please wait and check the beta in DJI Assistant 2.
2017-10-18
Use props
m13905
lvl.1
Mexico
Offline

Hi  dji   I having the same gimbal noise problem on a phantom 4 pro as others on this thread.  Could you please add me to the beta firmware list as well?

rmcguire@binghamton.edu
2017-10-31
Use props
Kipasmuter
New

Indonesia
Offline

Dear dji,

i have same problem. my account hanky@bintangindokarya.co.id
2017-10-31
Use props
DJI Susan
Administrator
Offline

m13905 Posted at 2017-10-31 18:24
Hi  dji   I having the same gimbal noise problem on a phantom 4 pro as others on this thread.  Could you please add me to the beta firmware list as well?

Received with thanks! I'll forward to the designated team to add you in. Please try to refresh the firmware when you received it.
2017-10-31
Use props
DJI Susan
Administrator
Offline

Kipasmuter Posted at 2017-10-31 18:46
Dear dji,

i have same problem. my account

I have received your message in PM, thanks! The beta firmware only fix the gimbal issue. According to your description, there is no live feed from the gimbal, not the one we talked about here. I would recommend you to refresh the firmware via DJI Assistant 2 and make sure the aircraft and RC firmware matched, then linking RC. Please let us know whether it helps.
2017-10-31
Use props
Kipasmuter
New

Indonesia
Offline

DJI Susan Posted at 2017-10-31 23:05
I have received your message in PM, thanks! The beta firmware only fix the gimbal issue. According to your description, there is no live feed from the gimbal, not the one we talked about here. I would recommend you to refresh the firmware via DJI Assistant 2 and make sure the aircraft and RC firmware matched, then linking RC. Please let us know whether it helps.

i already refresh the firmware and still problem about the gimbal. still no live feed from the gimbal
2017-11-1
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Kipasmuter Posted at 2017-11-1 16:37
i already refresh the firmware and still problem about the gimbal. still no live feed from the gimbal

When did this issue start? Did anything happen before, like hard landing or crash or firmware upgrading? Can you control the gimbal?
2017-11-1
Use props
Fastdrone
lvl.1
Flight distance : 41896 ft
Brazil
Offline

Fastdrone Posted at 2017-10-18 08:34
Good Afternoon Thor.

I am also having the same problem. Loud Noise when turn on the P4P, video trembling and Gimbal calibration freeze at 50%.  Can you please send me the beta as well?

Hi DJI Elektra . Thank you to include the beta in my account. It worked well and stop the noise and problems with calibration

BUT for now the RC updated and shows the message " Aircraft disconnected" Red Button on the Remote Control. How Can I downgrade the version of the Remote Control?
2017-11-4
Use props
DJI Susan
Administrator
Offline

Fastdrone Posted at 2017-11-4 02:35
Hi DJI Elektra . Thank you to include the beta in my account. It worked well and stop the noise and problems with calibration

BUT for now the RC updated and shows the message " Aircraft disconnected" Red Button on the Remote Control. How Can I downgrade the version of the Remote Control?

Sir, I have replied you in this post: https://forum.dji.com/thread-100091-16-1.html
Please keep us posted there, I'll keep follow up for you. Thanks for cooperation.
2017-11-9
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules