Hi and tnxs for reading.
Today, once landed and on the ground by selecting my Spark Remote controller central switch to Sport, I noticed the live view to roll and I got the master warning Gymbal Overload Error. The error was removed by disabling Sport, and appeared again by selecting the Sport mode again.

I then switched the Spark OFF and ON again and no problem whatsoever anymore... Is it something I should worry about or may it happen?
It never happened before and after restarting my Spark I had no other issue...

i dropped my spark in the sand at the beach and had that come up. i used compressed air at home and don't have that error anymore.

If the problem happens again and it remains the same. Please send it back for check. Thanks for your support.