Has anyone come across a Transmitter Tray that will work with the Cendence (i.e., Secraft)?

I'm wondering if this will work: Secraft Universal Tray

DJI talks about using the "Cendence Support Rig".  Does anyone now what this option is and if anyone has photos of it to share?

Can someone share this dimension (Dimension A)?

Can someone share this dimension (Dimension B)?

Can someone share this dimension (Dimension C)?

Can someone share this dimension (Dimension D)?

Can someone share this dimension (Dimension E)?

www.floridadronesupply.com may have your answer.

Fortnight Posted at 2017-10-25 01:34
www.floridadronesupply.com may have your answer.

@Fortnight - Thank you for the contact.  I will reach out to them today.  Do you happen to know where they are located in Florida?

Fortnight Posted at 2017-10-25 01:34
www.floridadronesupply.com may have your answer.

No luck with floridadronesupply.com.  They were not sure.

RichfromHowellN Posted at 2017-10-26 02:46
No luck with floridadronesupply.com.  They were not sure.

Sorry about that.

Fortnight Posted at 2017-10-27 01:30
Sorry about that.

No biggie ... I appreciate the lead.  Still hoping someone will come forward with this info.

Disappointed that I'm getting nowhere with this.

Good news I want to share with our community that might be interested.  I just got word back from SECRAFT and they indicated that they are currently developing a transmitter tray to work with the Cendence.  As soon as I have more information as to when they will be releasing it, I will share it here.

Does anyone have any experience with the Pro Grip Radio Tray?  This maybe an alternative to SECRAFT.  I would prefer using the SECRAFT but still have not heard back from them on a date which they will be releasing their Transmitter Tray for the Cendence.

Can someone confirm this legnth on the DJI Cendence for me?



I've heard that it is around 153mm.  If so, then the TX-Tray V1(S) Secraft Tray should work for the DJI Cendence.

RichfromHowellN Posted at 2017-11-10 02:39
Good news I want to share with our community that might be interested.  I just got word back from SECRAFT and they indicated that they are currently developing a transmitter tray to work with the Cendence.  As soon as I have more information as to when they will be releasing it, I will share it here.

Good News/Bad News - Yes Secraft agreed that they were developing a Transmitter Tray for the Cendence.  The bad news is it will not be coming out until sometime next year.

https://www.vario-helicopter.biz ... mitter+tray&x=0&y=0

I use the top one

eggbeater Posted at 2017-11-13 09:55
https://www.vario-helicopter.biz ... mitter+tray&x=0&y=0

I use the top one

Please confirm that tray works with your Cendence.

Yes, I use Velcro to keep it held in.

eggbeater Posted at 2017-11-14 13:10
Yes, I use Velcro to keep it held in.

@eggbeater ... thank you for sharing!

RichfromHowellN Posted at 2017-11-12 03:57
Can someone confirm this legnth on the DJI Cendence for me?

[view_image]

184mm with the Cendence Remote Controller Support Rig installed.  That would mean that the Secraft TX-Tray V1(L) should work.

RichfromHowellN Posted at 2017-11-14 13:34
184mm with the Cendence Remote Controller Support Rig installed.  That would mean that the Secraft TX-Tray V1(L) should work.

I heard back from Secraft and they said that the Secraft TX-Tray V1(L) will not work on the Cendence.  Secraft also restated that they do have a tray in development now but would not commit to a release date.

RichfromHowellN Posted at 2017-10-24 05:57
DJI talks about using the "Cendence Support Rig".  Does anyone now what this option is and if anyone has photos of it to share?

It is a Harness, rather large and bulky. I thought it was discontinued but one came with my Cendence. It goes around your shoulders and is made of nylon. It is not rigid. I elected to use the DJI Lanyard and it works fine and easy to use.

Rodger8 Posted at 2017-12-3 06:16
It is a Harness, rather large and bulky. I thought it was discontinued but one came with my Cendence. It goes around your shoulders and is made of nylon. It is not rigid. I elected to use the DJI Lanyard and it works fine and easy to use.

Would it be possible for you to upload a photo of our setup?

RichfromHowellN Posted at 2017-12-3 13:16
Would it be possible for you to upload a photo of our setup?

Actually I left it in the sealed bag in the shipping carton as soon as I recognized it.

Get the largest transmitter tray

Attach patch to front of tray with velcro  


All weather transmitter glove home built

@eggbeater - you weren't kidding when you said this is the largest transmitter tray.

Has its own pelican case too.  Slave has the same tray too.  Hands rest on the sides so theres no fatigue for hours and its warm in the winter.  Thanks for checking out.

I use the V1 from Secraft. I mounted it high enough so I can swap batteries.

Nice work!  I guess you keep it connected to the tray all the time being that you are using zip ties?

Yes. I let it on the tray. Those tie raps are only for security. I don't put it back in the case of the M210, because with the tray it doesn't fit.

Zuidwestdrones Posted at 2017-12-10 10:33
I use the V1 from Secraft. I mounted it high enough so I can swap batteries.
[view_image]
[view_image]

Did you use the Secraft V1 (S) or the V1 (L) ?

RichfromHowellN Posted at 2018-1-27 02:47
Did you use the Secraft V1 (S) or the V1 (L) ?

[view_image]

I think it was the L

Zuidwestdrones Posted at 2018-1-27 10:13
I think it was the L

Is there a way you can confirm that it was the L?  I would really appreciate the effort.

RichfromHowellN Posted at 2018-1-27 13:57
Is there a way you can confirm that it was the L?  I would really appreciate the effort.

You're right. It was the S. I had to look at the invoice. I was confused because I wanted also the mobile grip and that was L, but with the crystalsky, I didn't need it anymore.Maybe you can't see it on the pictures I posted before, but I used also the stopper pin to hold my Cendence high enough so I can swap batteries.

Thank you for confirming that it was the S and not the L.  It looks like you mounted the stopper pin on the Cendence Support Rig.  If Secraft does not come through with a tray for the Cendence within the next few months, I'm going to go your route.  I really appreciate you sharing!

RichfromHowellN Posted at 2018-1-27 17:10
Thank you for confirming that it was the S and not the L.  It looks like you mounted the stopper pin on the Cendence Support Rig.  If Secraft does not come through with a tray for the Cendence within the next few months, I'm going to go your route.  I really appreciate you sharing!

Anyone use the  Tarot remote control tray TL2876 ?
http://www.tarot-rc.com/index.ph ... mp;products_id=1230http://www.tarot-rc.com/index.ph ... mp;products_id=1230

Gael Posted at 2018-2-13 09:10
Anyone use the  Tarot remote control tray TL2876 ?
http://www.tarot-rc.com/index.php?main_page=product_info&cPath=102&products_id=1230http://www.tarot-rc.com/index.php?main_page=product_info&cPath=102&products_id=1230

I just sent the manufacturer an email to see if this transmitter tray is compatible with the DJI Cendence.