Please select Into the mobile phone version | Continue to access the computer ver.
Firmware v1.11.30 for ESC error??
Uploading and Loding Picture ...(0/1)
o(^-^)o
Maiberg
lvl.1
Brazil
Offline

DJI Susan Posted at 2018-2-26 03:03
Simon, I have sent the download link to you in PM, please check whether you have received it, thanks!

I have the same issue after updated my P3 Adv to 1.11.20, could you send me this firmware? @DJI Susan
2018-5-16
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

jfdfirefighter Posted at 2018-5-16 00:46
i am having the same ESC error, please share the page, thanks

Hi, the bin file has been sent to you via PM, please go to check it. Thanks!
2018-5-16
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

TomSea.53 Posted at 2018-5-14 12:13
I have a dead P3P due to the firmware update, Mind sharing that fix. The props won't even spin after installing a new main board. Thanks

Hi, I'm sorry to hear about the issue that you are experiencing. I have sent you the bin file via PM, please go to check it. Hope everything will be fine soon, thanks!
2018-5-16
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline


Hi, so sorry to reply you late. May I confirm that which drone do you refer to? P3P or P3A,  please?
2018-5-16
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

TCafe.vn Posted at 2018-5-5 23:33
HI DJI Susan !
I have a Phantom 3 Pro, I having the same ESC status erro, please send me the 1.11.30 file to fix this error. Thank you!

Hi, so sorry to reply you late. May I confirm that have you solved the issue or not? If not, I'd like to forward the correct bin file to you. Thanks!
2018-5-16
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Maiberg Posted at 2018-5-16 17:04
I have the same issue after updated my P3 Adv to 1.11.20, could you send me this firmware? @DJI Susan

Hi, I'm sorry to hear about the issue that you are experiencing. I have sent you the bin file via PM, please go to check it. Hope everything will be fine soon, thanks!
2018-5-16
Use props
Fat City
lvl.1
Flight distance : 32730 ft
United States
Offline

DJI Diana Posted at 2018-5-16 19:21
Hi, I'm sorry to hear about the issue that you are experiencing. I have sent you the bin file via PM, please go to check it. Hope everything will be fine soon, thanks!

My P3A has 1.11.20 and has the ESC errors. Could you kindly send me 1.11.30 ?
Thanks in advance.
2018-5-20
Use props
Neo116
New
Pakistan
Offline

DJI Diana Posted at 2018-5-16 19:18
Hi, so sorry to reply you late. May I confirm that which drone do you refer to? P3P or P3A,  please?

I would like the link for the v1.11.30  for the P3P
2018-5-20
Use props
Sezer57
lvl.1

Turkey
Offline

DJI Diana Posted at 2018-5-16 19:18
Hi, so sorry to reply you late. May I confirm that which drone do you refer to? P3P or P3A,  please?

p3 advanced
2018-5-21
Use props
Sezer57
lvl.1

Turkey
Offline

I have the same issue after updated my P3 Adv to 1.11.20, could you send me this firmware? @DJI Susan
2018-5-21
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Neo116 Posted at 2018-5-20 23:25
I would like the link for the v1.11.30  for the P3P

Hi, I have sent the bin file to you via PM, please go to check it, hope everything will be fine soon.
2018-5-22
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Fat City Posted at 2018-5-20 11:01
My P3A has 1.11.20 and has the ESC errors. Could you kindly send me 1.11.30 ?
Thanks in advance.

Hi, sorry to reply you late. I have sent the bin file to you via PM, please go to check it, hope everything will be fine soon.
2018-5-22
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline


Noted with thanks, please check the PM.
2018-5-22
Use props
Shatta Q
New

Belize
Offline

My P3A has 1.11.20 and has the ESC errors. Could you kindly send me 1.11.30 ?
Thanks in advance.
2018-5-25
Use props
ajaykadakia
New
Flight distance : 715 ft

United States
Offline

Simon Dunning Posted at 2018-2-16 01:54
Is it possible you could help me I have a phantom 3 advance  downloaded the latest firmware and all I’m getting is  esc error ?

I have Phantom 3 Pro that was updated and now showing ESC Status error when arming is attempted. Could I please have the FW that fixes it? I have 1.11.20 installed
2018-5-27
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

Shatta Q Posted at 2018-5-25 18:17
My P3A has 1.11.20 and has the ESC errors. Could you kindly send me 1.11.30 ?
Thanks in advance.

Hi Shatta, I'm sorry to hear about the issue that you are experiencing. The bin file has been sent to you via PM, please go to check it. Thanks.
2018-5-27
Use props
DJI Diana
Administrator
Flight distance : 2408 ft

Offline

ajaykadakia Posted at 2018-5-27 09:34
I have Phantom 3 Pro that was updated and now showing ESC Status error when arming is attempted. Could I please have the FW that fixes it? I have 1.11.20 installed

Hi, I'm sorry to hear about the issue that you are experiencing. The bin file has been sent to you via PM, please go to check it. Thanks.
2018-5-27
Use props
fans087407b0
New
Offline

Just got a brand new out the Box Phantom 3 pro is saying I need a film with firmware update the motors will not start but the app is connected and I have green lights had says redy to fly but the motors mount start can please any one help
2018-6-4
Use props
Antony Slater
lvl.1
Flight distance : 5144 ft

United Kingdom
Offline

DJI Susan Posted at 2017-10-24 18:50
Which drone do you refer? P3A or P3P? I'll help you get the v.1.11.30 firmware and try again.

I have a P3P with the exact same issue and and intermittent ESC Error message, please could you send me the .30 firmware to try and resolve this issue? Im worried to even try flying at the moment in case the error reports mid-flight!


Thanks in advance. :-)
2018-6-4
Use props
BarryOtterson
New
Canada
Offline

Antony Slater Posted at 2018-6-4 10:59
I have a P3P with the exact same issue and and intermittent ESC Error message, please could you send me the .30 firmware to try and resolve this issue? Im worried to even try flying at the moment in case the error reports mid-flight!

I have the same issue after updated my P3 Adv to 1.11.20, could you send me this firmware as well....? @DJI Susan  thx in advance.
2018-6-6
Use props
fansf2b32707
New
Flight distance : 76627 ft
United Kingdom
Offline

Hi Susan, I have the same issue with p3 pro after v.1.11.20 update, need help v.1.11.30 please
2018-6-7
Use props
palfelicjr
New
United States
Offline

I have the same problem with my P3P. Was sitting for 4 months then this happened ESC error message about 3 moths ago getting frustrated try to figure this out. Need help. Thank you
2018-6-8
Use props
chrisw
New
Canada
Offline

can you pls send me v.1.11.30 firmware for p3 pro
please

thank you
2018-6-10
Use props
DJI Susan
Administrator
Online

fans087407b0 Posted at 2018-6-4 09:09
Just got a brand new out the Box Phantom 3 pro is saying I need a film with firmware update the motors will not start but the app is connected and I have green lights had says redy to fly but the motors mount start can please any one help

Sorry for the late response. Just to verify, are you in beginner mode? If yes, I'd suggest testing in the open field with good GPS to see whether the motors can be started.
2018-6-11
Use props
DJI Susan
Administrator
Online

chrisw Posted at 2018-6-10 21:58
can you pls send me v.1.11.30 firmware for p3 pro
please

The messages from 219# to 223# have been well received, please check whether you have received the download link in PM later. If there are other questions, feel free to contact us.
2018-6-11
Use props
chrisw
New
Canada
Offline

DJI Susan Posted at 2018-6-11 03:40
The messages from 219# to 223# have been well received, please check whether you have received the download link in PM later. If there are other questions, feel free to contact us.

i upgraded firmware on aircraft and dji go app says version 1.1.20+

still get esc error. what do i do now?
aircraft worked before last update
2018-6-11
Use props
MORVIK
lvl.1
Canada
Offline

DJI Susan could you please send me a  link for the v1.11.30 fw for the P3A as mine seems to suffer from the ESC error when trying to start.

Thank-you.
2018-6-13
Use props
DJI Susan
Administrator
Online

chrisw Posted at 2018-6-11 05:29
i upgraded firmware on aircraft and dji go app says version 1.1.20+

still get esc error. what do i do now?

Do you refer to the 1.11.20+? If yes, I'm afraid that the issue cannot be figured out remotely, you may start a case to send the unit in: https://www.dji.com/support
2018-6-15
Use props
DJI Susan
Administrator
Online

MORVIK Posted at 2018-6-13 19:05
DJI Susan could you please send me a  link for the v1.11.30 fw for the P3A as mine seems to suffer from the ESC error when trying to start.

Thank-you.

I've read your comment in another post and responded as well. Please check the link in PM later, thanks!
2018-6-15
Use props
Unzig
lvl.1

Indonesia
Offline

DJI Susan Posted at 2018-6-15 01:10
I've read your comment in another post and responded as well. Please check the link in PM later, thanks!

Hi Susan, I have the same issue with P3P after v1.11.20 update, then I downgrade to 1.10.90, then try to downgrade again the firmware but its failed.
Can I use fw v1.11.30 to fixed it?
Please PM me the link fw v1.11.30.
2018-6-30
Use props
Anna DJI
New
Flight distance : 23143 ft
Italy
Offline

DJI Susan Posted at 2018-6-15 01:10
I've read your comment in another post and responded as well. Please check the link in PM later, thanks!

Hi, could You send me link to download firmware 11.30 to phantom 3 profesional?
2018-6-30
Use props
Faneur58
lvl.1
Flight distance : 13996 ft

Offline


bonjour j'ai un probleme ESC sur mon P3A c'est que je pourrais avoir le fireware v1.11.30 s'il vous plait ??
Je vous suis demandé dans le message
cordialement
2018-6-30
Use props
Mkurr
First Officer
Flight distance : 1605564 ft
United States
Offline

why not????
2018-6-30
Use props
Faneur58
lvl.1
Flight distance : 13996 ft

Offline

I read that it was necessary to ask Susan to get version 1.11.30 which corrects the ESC errors so I did and I wait for the answer
2018-6-30
Use props
DJI Susan
Administrator
Online

Unzig Posted at 2018-6-30 10:50
Hi Susan, I have the same issue with P3P after v1.11.20 update, then I downgrade to 1.10.90, then try to downgrade again the firmware but its failed.
Can I use fw v1.11.30 to fixed it?
Please PM me the link fw v1.11.30.

Sorry about this. Please kindly find the link in PM and see whether it is the correct one.
2018-7-1
Use props
DJI Susan
Administrator
Online

Anna DJI Posted at 2018-6-30 13:51
Hi, could You send me link to download firmware 11.30 to phantom 3 profesional?

Anna, I've sent you the download link in PM, see whether you have received it.
2018-7-1
Use props
DJI Susan
Administrator
Online

Faneur58 Posted at 2018-6-30 13:53
bonjour j'ai un probleme ESC sur mon P3A c'est que je pourrais avoir le fireware v1.11.30 s'il vous plait ??
Je vous suis demandé dans le message
cordialement

I've received your message in PM, and responded as well, please check later. If there are any further questions, feel free to contact us.
2018-7-1
Use props
DJI Susan
Administrator
Online


Sir, may I know what troubles do you encounter? Could you tell us more details so that we can help?
2018-7-1
Use props
Anna DJI
New
Flight distance : 23143 ft
Italy
Offline

DJI Susan Posted at 2018-7-1 01:49
Anna, I've sent you the download link in PM, see whether you have received it.

Thank You but next question is a special bin file to remote controler update? the indicator is still red
2018-7-1
Use props
Anna DJI
New
Flight distance : 23143 ft
Italy
Offline

Anna DJI Posted at 2018-7-1 03:41
Thank You  but next question  is a special bin file to remote controler update? the indicator is still red

Tyć, i have solved it now everythink is working
2018-7-1
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules