Please select Into the mobile phone version | Continue to access the computer ver.
DJI Focus Thumbwheel not working
1797 8 2017-10-27
Uploading and Loding Picture ...(0/1)
o(^-^)o
joeyB106
lvl.1

United States
Offline

Hey Guys i just got my DJI Focus Thumbwheel and using it with my Ronin M. and i cant get this to work at all. anyone have this problem? its driving me nuts to spend all this money on everyting for it not to work!
2017-10-27
Use props
DJI Mindy
Administrator
Flight distance : 7 ft
  • >>>
Offline

Sir, please refer to the following tutorial video to make sure you connect DJI Focus Thumbwheel properly.
2017-10-28
Use props
joeyB106
lvl.1

United States
Offline

DJI Mindy Posted at 2017-10-28 02:28
Sir, please refer to the following tutorial video to make sure you connect DJI Focus Thumbwheel properly.
https://www.youtube.com/watch?v=TDhZPPSvExI&t=2s

That would be great if i had the Ronin MX but i have the Ronin M. when i hook up the cables that are supplied, and the p-tap power to the motor it powers up but doesn't do anything!
2017-10-29
Use props
joeyB106
lvl.1

United States
Offline

Here are some photos
532CDA7E-1851-415E-A678-B8CB80E8A6BB.jpeg
A90045FD-B648-4050-854C-5BA441EBF0D8.jpeg
0445A335-B548-466F-8999-F927B87351FE.jpeg
5C19B682-9EAF-45C7-8A05-DAF1C51C4530.jpeg
2017-10-29
Use props
joeyB106
lvl.1

United States
Offline

/Users/joeybenz/Desktop/Screen Shot 2017-10-29 at 7.35.46 PM.png[img][/img]
2017-10-29
Use props
OliJev
lvl.1
United States
Offline

I am having the exact same problem. I have connected the Focus Thumbwheel to the CAN Port on my Ronin-M and powered up and calibrated the Focus Motor. When I hold down the calibrate buttons on the focus thumbwheel, nothing happens. All firmware is up to date.
2017-11-2
Use props
joeyB106
lvl.1

United States
Offline

OliJev Posted at 2017-11-2 08:25
I am having the exact same problem. I have connected the Focus Thumbwheel to the CAN Port on my Ronin-M and powered up and calibrated the Focus Motor. When I hold down the calibrate buttons on the focus thumbwheel, nothing happens. All firmware is up to date.

i just bought the focus motor expansion module cable. the plus side of this not working for me is i went into the DJI store in manhattan talked with them for an hour regarding this. then found out that my Nikon D5 was way too big for the setup. so now i just ordered the Ronin MX. with that being said ill be selling the M. but i know for a fact the the MX doesn't have any problems.
2017-11-2
Use props
joeyB106
lvl.1

United States
Offline

OliJev Posted at 2017-11-2 08:25
I am having the exact same problem. I have connected the Focus Thumbwheel to the CAN Port on my Ronin-M and powered up and calibrated the Focus Motor. When I hold down the calibrate buttons on the focus thumbwheel, nothing happens. All firmware is up to date.

did you actually get the Motor to move? when you calibrated it?
2017-11-2
Use props
joeyB106
lvl.1

United States
Offline

ok with the ronin M i plugged in the 23 expansion cable and still no luck.
2017-11-2
Use props
Advanced
You need to log in before you can reply Login | Register now

Credit Rules